Water Pump Einhell GE-AW 1042 FS

The Einhell GE-AW 1042 FS water pump is a 1050 W utility pump designed for moving clean water in residential and garden installations. With a maximum pressure of 4.8 bar and a rated flow of up to 4200 litres per hour, the unit supports water transfer, garden irrigation and boosting water supply. The compact housing (225 mm width, 505 mm depth, 390 mm height) and a 1.5 m power cable make the pump convenient to position and operate in small technical rooms, basements or outdoor cabinets.

Advantages

The pump combines a high-power motor with a robust hydraulic block to deliver stable flow and pressure for a variety of domestic tasks. Its maximum delivery height of 48 m and a suction connection of 1 1/4" enable efficient evacuation and transfer of water over moderate distances and heights. The compact footprint and simple electrical connection reduce installation effort while the durable construction is intended for regular use in garden and household water applications.

Suitable for

• Garden irrigation and sprinkler systems
• Transferring water from barrels, cisterns or ponds
• Boosting water pressure for domestic supply
• Draining shallow flooded areas and basements

Key specifications

• Power input: 1050 W
• Maximum pressure: 4.8 bar
• Maximum flow rate: 4200 l/h
• Maximum delivery height (head): 48 m
• Suction/connection size: 1 1/4"
• Compact dimensions: 225 × 505 × 390 mm (W × D × H)
• Cable length: 1.5 m

How to use

Place the pump on a stable, level surface close to the water source and ensure the suction line is correctly connected to the 1 1/4" inlet. Check that all connections are tight and that the suction hose is free of air leaks. Connect the unit to a suitable power supply using the 1.5 m cable and switch on according to the manufacturer's instructions. Monitor pressure and flow during initial operation and avoid running the pump dry. After use, disconnect power and drain remaining water from the pump and hoses to prevent frost damage or sediment buildup.

Usage recommendations

Use clean water only and fit appropriate filtration if pumping from open sources with debris. For continuous or heavy-duty use, allow the pump to cool periodically and follow regular maintenance checks of seals and impeller. Ensure electrical connections comply with local regulations and consider a residual-current device (RCD) for safety.