Network Cable Ekivalan LWL Duplex Patch Cable OS2 9/125 µm LC APC/LC yellow 15.0 m

The Ekivalan LWL Duplex Patch Cable OS2 9/125 µm LC APC/LC yellow 15.0 m is a single-mode fiber optic patch cable designed for long-distance, low-loss transmission. It uses a 9/125 µm core/cladding geometry and LC APC connectors on both ends to provide stable optical performance and low back reflection. The 15.0 m length and bright yellow jacket make routing and identification simple in data centers, telecom closets, and structured cabling installations.

Advantages

This single-mode OS2 cable provides low attenuation and high return loss due to the 9/125 µm fiber geometry and angled-polish (APC) connector interfaces. The duplex construction supports bidirectional links or paired channels while maintaining consistent insertion loss across both fibers. A durable outer jacket and precise connector ferrules ensure reliable mating cycles and mechanical protection, reducing maintenance needs and minimizing signal degradation over distance.

Suitable for

• Long-haul and campus backbone optical links
• Data center interconnects and rack-to-rack connections
• Telecommunications and carrier networks requiring low back reflection
• FTTx and subscriber access where single-mode fiber is specified

Key specifications

• Fiber type: Single-mode (OS2), 9/125 µm core/cladding
• Connector type: LC APC to LC (angled physical contact at least one end APC)
• Configuration: Duplex (two fibers)
• Length: 15.0 meters
• Jacket color: Yellow for single-mode identification
• Typical applications: Long-distance transmission, low-loss links

How to use

Route the duplex patch cable between LC-equipped ports in patch panels, transceivers or networking equipment, ensuring connector cleanliness before mating. Gently insert each LC connector into the corresponding LC socket until it latches; avoid sharp bends and maintain the minimum bend radius to prevent increased attenuation. For best optical performance, use appropriate dust caps when connectors are not in use and follow standard fiber handling procedures during installation and maintenance.

Usage recommendations

Inspect and clean LC APC endfaces with approved fiber-cleaning tools prior to installation. Avoid frequent flexing or tight bundling; secure the cable with Velcro straps or cable management trays rather than cable ties. For links requiring the lowest possible return loss, mate APC connectors only with APC counterparts and verify link performance with an optical power meter or OTDR after installation.