Fire safety cable electro base PRO BASE PB-1x2x0.5 Red 100m

Fire safety cable electro base PRO BASE PB-1x2x0.5 Red 100m is a single-core red cable with two 0.5 mm² conductors intended for use in fire detection, alarm and control circuits. The cable is designed for low-voltage signal transmission and for permanent routing of wiring in both commercial and residential fire safety systems. Its colour coding and conductor size make identification and installation straightforward in panel, detector and terminal connections.

Advantages

The cable provides a compact conductor cross-section suitable for signal and control lines while maintaining mechanical flexibility for routing through conduit and cable trays. Its red sheath supports clear visual identification for fire safety circuits. The cable construction ensures reliable connectivity for alarm systems, with conductors sized to match common detector and control device requirements. The 100 m length offers a practical roll size for medium and small installation runs.

Suitable for

• Wiring of smoke and heat detectors in fire alarm systems
• Connections between control panels and peripheral devices in detection systems
• Low-voltage signal and supervisory circuits in residential and commercial buildings
• Retrofit and new installations requiring dedicated fire-safety cable routing

Key specifications

• Conductor configuration: single core with two conductors
• Conductor cross-section: 0.5 mm² per conductor
• Outer sheath colour: red for fire circuit identification
• Length per roll: 100 m
• Voltage rating: suitable for low-voltage signal applications (alarm/control)
• Typical applications: fire detection, alarm signalling and control wiring

How to use

Plan cable runs from detectors and sensors to the control panel, keeping routes clear of high-voltage power lines to avoid interference. Cut the required length from the 100 m roll and strip conductor insulation carefully to avoid nicking the cores. Terminate conductors into detector terminals, panel inputs or junction blocks according to the installation schematic and manufacturer wiring guidelines for each device. Secure the cable in place with appropriate clips or ties and maintain separation distances where specified by local electrical and fire codes.

Usage recommendations

Use this cable only for low-voltage fire detection and alarm circuits. Verify compatibility with detectors, panels and local standards before installation. Avoid running the cable alongside mains power conductors without proper segregation and follow local regulations for fire alarm system installation and testing.