Single-mode Duplex Fiber Patch Cable electro base SC/UPC to LC/UPC 1.0 m LSZH

Single-mode duplex fiber patch cable by electro base featuring an SC/UPC connector on one end and an LC/UPC connector on the other. The cable is 1.0 m long and uses a low-smoke zero-halogen (LSZH) jacket for reduced toxic and corrosive gas emission in case of fire. It is designed for single-mode optical networks and high-speed data links where reliable single-fiber duplex transmission, compact LC terminations and robust SC connections are needed.

Advantages

This electro base single-mode duplex patch cable provides consistent optical performance with UPC polished connectors that minimize back reflection. The hybrid connector pair (SC to LC) allows flexible interconnection between equipment with different port types without additional adapters. The LSZH outer jacket improves safety in enclosed spaces and reduces smoke and halogen emissions. The 1.0 m length simplifies short-range patching in racks, panels and telecom enclosures while maintaining stable mechanical alignment and mating durability.

Suitable for

• Data centre patching and intra-rack fiber connections
• Telecommunications equipment interconnection
• FTTH termination panels and subscriber terminations
• Optical test setups and laboratory fiber links
• Network cabinets where LSZH cable jackets are required

Key specifications

• Fiber type: single-mode duplex
• Connector A: SC with UPC polish
• Connector B: LC with UPC polish
• Length: 1.0 m
• Jacket: LSZH (low-smoke zero-halogen)
• Polish type: UPC for low return loss
• Cable configuration: duplex (two fibres, tight-buffered)

How to use

Insert the SC/UPC connector into the corresponding SC port until it latches, and plug the LC/UPC connector into the LC adapter or device port ensuring correct orientation of the latch. Verify clean connector endfaces before mating by using appropriate fiber cleaning tools or wipes to avoid contamination that can affect signal quality. When routing the cable, avoid sharp bends and maintain the manufacturer’s minimum bend radius to prevent attenuation increase or mechanical damage. For permanent installations, secure the cable with strain reliefs or cable management accessories to prevent tension on the connectors.

Usage recommendations

Regularly inspect and clean connector endfaces prior to use; store the cable with protective caps when not connected. Use LSZH cabling in enclosed or public spaces where low smoke and halogen-free materials are required by local safety codes. For testing or troubleshooting, pair with compatible single-mode equipment and check insertion loss and return loss to confirm link performance.