Optical patch cable electro base SC–SC 90° angled duplex single-mode 2 m

Electro base SC–SC 90° angled duplex single-mode 2 m patch cable is a duplex fiber-optic cable with SC connectors configured at a 90° angle. It is intended for single-mode fiber links and offers a compact connector profile that reduces the required clearance behind equipment and in patch panels. The 2 meter length balances reach and cable management for indoor installations in telecom racks, server cabinets and wall-mounted outlets.

Advantages

The 90° angled SC connectors allow neat cable routing in confined spaces and prevent stress where connectors are close to walls or adjacent ports. As a single-mode duplex assembly, it supports low-loss transmission across long distances within a network segment. The standardized SC interface ensures compatibility with a wide range of optical transceivers, adapters and patch panels commonly used in networking and telecommunications equipment.

Подходит для

• Соединения в серверных стойках и коммуникационных щитах с ограниченным пространством за оборудованием
• Подключение абонентского и магистрального оборудования в телекоммуникациях
• Оптические кроссы и коммутационные панели в дата‑центрах
• Установки в настенных розетках и патч‑панелях с боковыми или задними ограничениями пространства

Key specifications

• Connector type: SC–SC duplex with 90° angled connectors
• Fiber type: single-mode
• Length: 2 m
• Polish/type: typically UPC/APC depending on variant (ensure matching connectors on both ends)
• Cable configuration: duplex, jacketed for indoor use
• Typical insertion loss: low-loss single-mode performance (check device specs for system budget)

How to use

Inspect connectors and ports for cleanliness before connection. Align each SC connector with the corresponding adapter or transceiver port and insert until it clicks into place; the angled housing is designed to seat in limited-clearance openings. For duplex links, ensure transmit and receive fibers are correctly matched between endpoints. Avoid tight bends at the connector entry and maintain minimum bend radius along the cable run to preserve single-mode performance.

Usage recommendations

Store connector dust caps until installation, use a fiber cleaning tool if contamination is suspected, and secure the cable with appropriate cable management to prevent strain. Match connector polish types and test the link after installation to verify insertion loss and continuity.

Optical patch cable electro base SC–SC 90° angled duplex single-mode 2 m is tailored for installations where standard straight connectors would interfere with equipment placement, providing a practical solution for organized, low-loss single-mode patching.