Coaxial Cable Elektrokabel YWDXek 75-0.59/3.7 K-60 with 2×0.5 mm² conductor, 100 m reel

Electrokabel YWDXek 75-0.59/3.7 K-60 with 2×0.5 mm² conductor on a 100 m reel is a combined coaxial cable designed for signal transmission with integrated auxiliary conductors. The coaxial core with characteristic parameters 75-0.59/3.7 provides compatibility with standard 75 Ω systems used in video and antenna applications, while the two 0.5 mm² conductor cores allow low-voltage power or control wiring to run alongside the signal path without the need for separate cables.

Advantages

This cable combines a single coaxial signal path and two auxiliary conductors in one sheath, reducing installation complexity and material bulk. The integrated 0.5 mm² conductors are suitable for low-current power and control signals, enabling compact routing for CCTV cameras, antenna amplifiers and related accessories. Supplied on a 100 m reel, the cable is convenient for medium to large installations and supports uninterrupted pulling and measurement during deployment.

Suitable for

• CCTV camera video feed and simple power/control lines
• Antenna and TV distribution systems with auxiliary wiring
• Low-voltage accessory connections where combined signal and control are required
• Indoor and protected outdoor routed installations where a single-cable solution is preferred

Key specifications

• Coaxial characteristic arrangement: 75-0.59/3.7 suitable for 75 Ω signal systems
• Two auxiliary conductors, each 0.5 mm² cross-sectional area
• Cable length per reel: 100 meters
• Combined single-sheath construction for coax and auxiliary wires

How to use

Strip the outer sheath to expose the coaxial core and the two auxiliary conductors, taking care not to nick the braid or inner dielectric. Terminate the coaxial core with appropriate connectors (BNC, F-type or other 75 Ω connectors) suitable for the intended equipment. Connect the 0.5 mm² conductors to low-voltage power or control terminals, observing polarity and voltage/current limits compatible with the conductor cross section. Route the cable to avoid sharp bends and mechanical damage; fix the reel as needed to maintain smooth payout during installation.

Usage recommendations

Use the auxiliary 0.5 mm² conductors only for low-voltage power or control signals within their current capacity. For higher power requirements, provide a separate power feed. Verify connector types and impedance matching for best signal quality and minimize cable runs longer than recommended for your equipment to reduce signal loss.