End clamp for photovoltaic panels EMITK PV-KK/30-50/S for 30 mm rails

End clamp EMITK PV-KK/30-50/S is a fastening component designed to secure framed photovoltaic panels to mounting rails with a 30 mm profile height. The clamp provides edge fixation for PV modules in rooftop and ground-mounted solar systems where a 30 mm rail is specified, offering a compact solution for holding module frames firmly in place while maintaining compatibility with common framed panel dimensions.

Advantages

The end clamp offers a simple, space-efficient design that enables reliable panel fixation at array edges. Constructed for compatibility with framed PV modules and 30 mm rails, the clamp supports straightforward installation and reduces movement of the module frame under wind and operational loads. Its geometry permits use with typical panel frame thicknesses within the designed clamping range, ensuring secure contact without modifying the module frame.

Suitable for

• Securing framed photovoltaic panels to 30 mm profile rails
• Edge fixation in rooftop solar installations
• Ground-mounted PV arrays with 30 mm rail systems
• Residential and small commercial PV projects using standard framed modules

Key specifications

• Compatibility: designed for use with 30 mm profile mounting rails
• Application: end/edge clamp for framed photovoltaic modules
• Clamping range: suitable for typical framed module thicknesses (within 30–50 mm frame adaptation range)
• Material and finish: corrosion-resistant construction suitable for outdoor use (verify material with supplier)
• Mounting orientation: designed for horizontal rail mounting in rooftop or ground-mount systems

How to use

Position the clamp at the edge of the framed PV module so that the module frame sits within the clamping jaws. Align the clamp on the 30 mm profile rail and secure according to the mounting system procedure, tightening fasteners to the torque recommended by the racking manufacturer. Confirm that the module is flush and held firmly without excessive deformation of the frame. Repeat at each end of the module row or string as required by the system layout.

Usage recommendations

Use the clamp only with framed PV modules and verify the module frame thickness falls within the clamping range. Follow the mounting rail manufacturer's torque and spacing guidelines, check for corrosion resistance appropriate to the installation environment, and inspect fastener tightness after the first months of operation and periodically thereafter.