Circuit breaker E.NEXT e.mcb.pro.60 1P B10A 6kA (EX-P041007) — single-pole overcurrent protection 10 A, 6 kA breaking capacity

E.NEXT e.mcb.pro.60 1P B10A 6kA is a single-pole miniature circuit breaker developed for overcurrent protection in residential and light commercial electrical installations. The device provides reliable trip performance for both short-circuit and overload conditions, with a rated operating current of 10 A and a fault breaking capacity of 6 kA. Its compact single-pole form factor is intended for installation in standard DIN-rail distribution boards to protect lighting, outlet circuits and small appliances.

Advantages

The circuit breaker delivers precise B-characteristic tripping suitable for circuits with moderate inrush currents. With a 6 kA breaking capacity, it safely interrupts short-circuit currents typical for household and small commercial networks. The single-pole design minimises space usage on DIN rails while providing clear manual switching and mechanical indication of contact position. Constructed to industry standards, it supports consistent operation and integration into conventional distribution panels.

Suitable for

• Protection of lighting circuits in homes and apartments
• Protection of socket and small-appliance circuits
• Use in small commercial or office distribution boards
• Circuit segments with moderate inrush currents such as LED drivers and small motors

Key specifications

• Poles: single-pole (1P)
• Tripping characteristic: B-type
• Rated current: 10 A
• Breaking capacity: 6 kA
• Mounting: DIN-rail compatible
• Manual operation: on/off toggle with mechanical position indication

How to use

Install the device on a standard 35 mm DIN rail inside the distribution board, ensuring correct orientation and secure terminal connections to phase conductor and load side. Tighten terminal screws to the manufacturer’s recommended torque and verify that the panel is de-energised before any wiring. After installation, test the breaker operation by switching it on and off and, if required, perform a controlled trip test by simulating overload within safe limits using appropriate test equipment. Verify compatibility with residual current devices and other protective components in the same panel.

Usage recommendations

Use this B10A breaker for circuits where moderate inrush currents occur; avoid using it on circuits with continuous currents near the rated value to prevent nuisance tripping. Regularly inspect terminals for tightness and signs of overheating, and replace the device if mechanical operation becomes stiff or contact indication is unreliable.