Submersible Dirty Water Pump EPM E-200-2002, 400W, for Wastewater and Drainage

Submersible dirty water pump EPM E-200-2002 with a 400W motor is designed to handle wastewater and drainage containing solid particles. The pump is suitable for moving contaminated, abrasive or turbid water from basements, construction pits, garden ponds and other locations where reliable removal of dirty water is required. Built for both intermittent and continuous operation, this pump offers a compact, submersible solution for dewatering and transfer tasks.

Advantages

The pump combines a robust 400W motor with an impeller engineered to pass small solids, ensuring consistent flow in challenging conditions. Its submersible design reduces the need for priming and allows operation directly in the water to be removed. The unit is constructed to resist common contaminants found in wastewater and includes features that simplify installation and maintenance while maintaining stable performance under load.

Suitable for

• Dewatering flooded basements and cellars
• Removing water from construction sites and excavations
• Emptying garden ponds and pools with debris
• Pumping wastewater from garages, workshops or outbuildings

Key specifications

• Power: 400 W
• Type: submersible dirty water pump
• Fluid: wastewater and drainage containing solids and debris
• Operation: suitable for continuous or intermittent use
• Installation: submersible in liquid to be pumped

How to use

Place the pump fully submerged in the water to be removed on a stable surface, ensuring the inlet is not blocked by large debris. Connect the discharge hose or pipe to the outlet and route it to a suitable drainage point. Connect the power lead to a properly rated and grounded supply, then switch on the pump. Monitor operation to ensure free flow of solids and check periodically for blockages. After use, disconnect the power, lift the pump from the water and clean the inlet and impeller area if necessary.

Usage recommendations

Avoid running the pump dry. Use a filter or strainer at the intake in environments with large debris. For prolonged or heavy-duty use, periodically inspect seals, power cable integrity and the impeller area to maintain reliable performance.