Fibre optic cable CUC Exertis Connect 392786

The CUC Exertis Connect 392786 is a 10 m OM4 fibre optic cable with LC connectors on both ends and a 50 µm core diameter designed for full duplex data transmission. It is intended for high-bandwidth networking environments where low attenuation and consistent signal integrity are required. The cable supports multimode optical transmission and is suitable for short- to medium-range links inside data centres, server rooms and network closets.

Advantages

This OM4 fibre provides higher modal bandwidth than OM3 multimode fibres, enabling improved performance for 10 GbE and higher-speed links over the specified distances. The LC connectors on both ends offer a compact form factor that is compatible with a wide range of transceivers and patch panels, facilitating dense port deployments. The full duplex configuration ensures simultaneous bidirectional communication, and the 10 m length reduces the need for additional patching hardware in many rack-to-rack or equipment-to-panel connections.

Suitable for

• Data centre patching and horizontal distribution
• Server-to-switch and switch-to-switch connections
• High-bandwidth applications such as 10 GbE, 40 GbE (with appropriate breakout/transceivers) and storage networking
• Telecommunications cabinets and network racks

Key specifications

• Nominal core diameter: 50 µm (multimode)
• Optical classification: OM4
• Connector type: LC to LC
• Length: 10 m
• Transmission mode: Full duplex
• Typical use: Indoor patch cord for data centre and LAN environments

How to use

Install the cable by aligning and inserting the LC connectors into the corresponding transceiver ports or patch panel adapters until they click into place. Ensure that the fiber bend radius is maintained above the minimum recommended value to avoid increased loss: route the cable through cable management trays or within racks to prevent tight bends and mechanical stress. For removal, depress the latch on the LC connector and gently withdraw the connector from the port. Clean connector endfaces with appropriate fibre cleaning tools before mating to maintain optimal signal performance.

Usage recommendations

Store and handle the fibre with care to prevent contamination and physical damage. Use dust caps when connectors are not in use, avoid exceeding manufacturer-recommended bend radii, and perform endface inspection and cleaning before installation. Choose OM4 multimode transceivers and patching equipment compatible with LC connectors to achieve the expected bandwidth and link distances.