PoE 1000M injector extra digital POE-006 60W Gigabit PoE power injector

The extra digital POE-006 is a Gigabit PoE injector that supplies up to 60W of DC power over a single Ethernet cable while passing 1000Base-T data. It is intended to add Power over Ethernet to devices when a PoE-capable switch is not available, enabling remote powering of IP cameras, wireless access points, VoIP phones and other PoE-compatible equipment.

Advantages

This PoE injector supports full Gigabit (10/100/1000 Mbps) data throughput while delivering up to 60W of power on the cable. It uses a standard 220V AC input and outputs 52V DC at up to 1.2A, with PoE power delivered on pins 4,5 (+) and 7,8 (−). The compact inline design makes it simple to add PoE to individual links without replacing existing network switches.

Suitable for

• Powering PoE Type 4 devices requiring up to 60W over a single Ethernet link
• Supplying power to Gigabit IP cameras and PTZ cameras
• Connecting wireless access points and high-power Wi‑Fi radios where PoE switches are unavailable
• Providing power to VoIP phones and network endpoints that accept 52V PoE on pins 4,5(+)/7,8(−)

When it may not be suitable

The injector is designed for single-link installations and is not a multi-port PoE switch; it only provides one PoE output. It requires a device that accepts PoE on the supported pin assignment and voltage; devices expecting alternative PoE pinouts or proprietary power methods may not work.

Key specifications

• Data rate: 10/100/1000 Mbps (Gigabit Ethernet)
• Maximum PoE output power: 60W (52V DC, up to 1.2A)
• PoE power pins: 4,5(+) and 7,8(−)
• AC input: 220V, 50–60 Hz, 0.5A
• Network connectors: 1x RJ45 LAN input, 1x RJ45 PoE output (Gigabit)

How to use

Connect the network uplink (switch or router) to the LAN input RJ45 port and connect the PoE output RJ45 port to the PoE device. Plug the injector into a 220V AC mains outlet. The injector will pass Ethernet data while injecting DC power onto the cable to power the connected device. Verify the powered device supports the 52V PoE on the specified pins before connection.

What to consider before purchase

• Ensure the powered device supports PoE at 52V with power delivered on pins 4,5(+)/7,8(−)
• Confirm the device’s power consumption does not exceed 60W (1.2A at 52V)
• Plan for a single PoE link per injector; multiple devices require additional injectors or a PoE switch

Usage recommendations

Use standard Cat5e or higher Ethernet cable for Gigabit operation and keep cable runs within recommended lengths. For stable operation, place the injector in a dry, ventilated location and avoid exceeding the rated output power.