Flexible connection hose FERRO WBS12 in stainless steel braid with short 3/8" fitting, length 50 cm

FERRO WBS12 is a flexible connection hose with a stainless steel braided cover and a short 3/8" fitting, length 50 cm. It is designed for connecting mixers, valves and sanitary appliances to the water supply, offering a compact option where a short-ended hose is required. The outer stainless steel braid provides mechanical protection while preserving hose flexibility for tight installation spaces.

Advantages

The stainless steel braid increases abrasion and compression resistance while maintaining flexibility for easy routing in confined areas. The short 3/8" fitting facilitates connections to compact mixers and valves. With a 50 cm length, the hose balances reach and manageability, reducing excess coiling and simplifying installation. Materials and construction focus on reliable water supply performance and durability under typical domestic and commercial conditions.

Suitable for

• Connecting kitchen and bathroom mixers to water supply lines
• Linking shut-off valves and supply points in tight installation spaces
• Replacing worn or damaged flexible hoses in domestic and commercial plumbing

Key specifications

• Connector type: short 3/8" fitting suitable for compact mixer and valve connections
• Length: 50 cm
• Outer cover: stainless steel braided for mechanical protection
• Function: flexible water supply hose for sanitary fittings

How to use

Shut off the main water supply and drain the system before replacing or installing the hose. Ensure mating threads and sealing surfaces on the mixer or valve and the supply stub are clean and intact. Hand-start the short 3/8" fitting to avoid cross-threading, then tighten to the required torque using an appropriate wrench; avoid over-tightening. After installation, restore water supply and check all connections for leaks under normal pressure. If any leak is detected, retighten or re-seat the connection as needed.

Usage recommendations

Use the hose within specified water pressure and temperature limits of the installation; avoid sharp bends or kinks and maintain a gentle bend radius. Inspect periodically for signs of wear or damage, especially at connection points, and replace if any deterioration is observed.