Water pump Fieldmann FVC 2001-EC, 250 W, 5000 l/h, max delivery 5 m, suction 6 m, 10 m cable

Fieldmann FVC 2001-EC is a 250 W submersible garden water pump designed for transferring clean water with up to 5000 litres per hour. The compact unit is intended for tasks such as irrigation, water transfer and drainage, and is suitable for operation in domestic gardens and on small plots. It features a float switch for automatic activation and deactivation, accepts particles up to 5 mm in diameter, and includes a 10 m power cable for flexible placement.

Advantages

The pump provides a combination of compact design and practical functionality: a 250 W motor that achieves a maximum delivery height of 5 m and a suction depth capability of up to 6 m. A built-in float switch enables automatic on/off control depending on water level, and the switch can be adjusted to change activation thresholds. The inlet tolerates small solid particles (up to 5 mm), and multiple outlet connection options support 1" or 2" hoses or a 1" threaded fitting. The 10 m power cable simplifies positioning without the need for additional extension cords.

Suitable for

• Garden irrigation and watering of beds and lawns
• Transferring water between tanks, barrels or ponds
• Draining flooded basements, cellars or low-lying areas
• Circulation or temporary pumping of clean water for outdoor tasks

Key specifications

• Motor input power: 250 W
• Maximum flow rate: 5000 l/h
• Maximum delivery height (head): 5 m
• Maximum suction (submersion) depth: 6 m
• Maximum particle size allowed: 5 mm
• Float switch with adjustable activation/deactivation level
• Outlet compatibility: 1" or 2" hose connections; 1" threaded connection option
• Supply voltage and frequency: 230 V / 50 Hz
• Power cable length: 10 m
• Suitable liquid: clean water

How to use

Install the pump in a stable position in the water source and ensure it is fully submerged within the permitted depth. Connect a suitable hose or threaded fitting to the outlet and route it to the discharge location. Plug the pump into a matching 230 V / 50 Hz power supply using the integrated 10 m cable. The float switch will start the pump automatically when the water level reaches the preset point and stop it when the level falls below the limit; adjust the float if different activation thresholds are needed. Avoid running the pump dry and ensure the intake is clear of large debris to maintain performance.

Usage recommendations

Use the pump only with clean water or water containing small solids up to 5 mm; regular inspection and cleaning of the intake and float switch will prolong service life. Do not operate the pump when the maximum delivery height or suction depth is exceeded. For prolonged outdoor use, protect electrical connections from moisture and use a residual-current device (RCD) for added safety.