Water pump Flo 79790, submersible 750 W, 230 V, IPX8, 10 m cable

Flo 79790 is a submersible water pump with 750 W motor power designed for 230 V / 50 Hz electrical supply. The pump has IPX8 protection for continuous underwater operation and comes with a 10 m rubberized power cable. With a compact stainless-steel body weighing approximately 4.2 kg and a vertical size suitable for confined installations, this unit is intended for draining flooded areas, garden ponds, water transfer and temporary dewatering tasks where a reliable submersible pump is required.

Advantages

The Flo 79790 combines a 750 W performance motor with a corrosion-resistant stainless steel housing to provide durability in both clean and moderately polluted water. An automatic float switch controls operation according to changing water levels, enabling hands-off start/stop functionality. The 10 m rubberized cable allows flexible positioning of the pump below ground level or in deep sumps, while multiple adapter connections support standard hose and pipe fittings.

Suitable for

• Draining basements and flooded rooms
• Pumping water from garden ponds and pools
• Temporary site dewatering and water removal
• Water transfer between containers or tanks
• Domestic and small-farm water handling tasks

Key specifications

• Power: 750 W
• Supply voltage: 230 V, 50 Hz
• Protection rating: IPX8 (continuous submersion)
• Cable length: 10 m, rubberized
• Housing material: stainless steel (inox)
• Automatic float switch for level-controlled operation
• Maximum water temperature: 35 °C
• External dimensions (diameter × height): 135 × 310 mm
• Minimum shaft/cut-out cross-section requirement: 40 × 40 × 50 cm
• Adapter connection sizes: 1", 1-1/4", 1-1/2"

How to use

Install the Flo 79790 pump by placing it on a stable, level surface in the area to be drained or submerged, ensuring the minimum shaft/cut-out cross-section is respected. Connect the appropriate adapter and discharge hose or pipe to the pump outlet, route the 10 m power cable to a properly earthed 230 V supply and keep the cable free of sharp bends. The built-in automatic float switch will start and stop the pump according to water level; if manual control is required, position the float to the desired activation height. Avoid running the pump dry and ensure pumped water does not exceed the maximum temperature of 35 °C.

Usage recommendations

For reliable operation, periodically inspect the pump housing and intake for debris and clean the impeller area if necessary. Use appropriate discharge fittings and secure hoses to the adapter connections to prevent leaks. When storing the pump for extended periods, drain and dry the unit and store it in a frost-free environment.