Water pump Flo 79791, submersible/utility pump, 900 W, 230 V, IPX8, 10 m cable

Flo 79791 is a 900 W submersible utility pump designed for pumping, draining and circulating water in domestic, garden and light-construction environments. The unit runs from a 230 V / 50 Hz mains supply, has IPX8 protection for continuous submersion and includes a 10 m rubberized power cable. With a stainless steel (inox) housing and a compact footprint (160 x 340 mm), the pump is intended for transferring clean and moderately polluted water where reliable continuous operation and corrosion resistance are required.

Advantages

The pump combines 900 W power with a corrosion-resistant stainless steel body to provide durable performance in wet environments. An automatic float switch enables hands-free operation by responding to changing water levels, while the IPX8 rating allows continuous submersion without compromise to electrical safety. A 10 m rubberized cable gives flexibility in positioning the pump relative to the power source, and multiple adapter connections (1", 1-1/4", 1-1/2") support standard hose and pipe sizes for quick installation.

Suitable for

• Draining flooded basements and cellars
• Emptying garden ponds, swimming pools and rainwater tanks
• Construction site dewatering and temporary water removal
• Water transfer for households, farms and summer houses
• Aeration and circulation of water in small reservoirs

Key specifications

• Rated power: 900 W
• Supply voltage: 230 V / 50 Hz
• Protection class: IPX8 (continuous submersion)
• Housing material: stainless steel (inox)
• Cable length: 10 m, rubberized
• Physical dimensions (diameter x height): 160 x 340 mm
• Minimum inlet cross-section recommendation: 40 x 40 x 50 mm
• Maximum pumped water temperature: 35 °C
• Connection adapters provided: 1", 1-1/4", 1-1/2"

How to use

Before first use, inspect the cable, plug and pump housing for visible damage. Select the required adapter and attach a discharge hose or pipe to the chosen connection size. Place the pump on a stable surface in the water so the float switch can move freely; ensure the water temperature does not exceed 35 °C. Connect to a 230 V mains supply using an appropriately rated circuit and, if required by local regulations, a residual-current device (RCD). The automatic float switch starts and stops the pump according to water level; for continuous operation disable the float only when the application and environment permit. After operation, disconnect power, lift the pump out of the water by its housing (not by the cable), drain residual water and store in a dry place.

Usage recommendations

Use the Flo 79791 for clean and moderately polluted water; avoid operation with large solids or abrasive slurry. Maintain regular visual inspections of the cable and housing, clear the inlet area from debris to preserve flow and cooling, and follow local electrical safety rules. For installations with long cable runs or permanent setups, consult a qualified electrician to verify grounding and circuit protection.