Submersible water pump Flo 79792 — 1100 W, 230 V, IPX8, 10 m cable

Flo 79792 is a submersible water pump with an 1100 W electric motor, intended for use with 230 V / 50 Hz mains. The pump is designed for continuous immersion thanks to an IPX8 waterproof rating and is supplied with a 10 m power cable. With a compact 4.9 kg body, the unit is suitable for removing water from basements, ponds, and construction sites, and for general water transfer tasks that require dependable underwater operation.

Advantages

The pump offers high motor power for efficient water transfer while maintaining a compact, lightweight design that simplifies handling and placement. Its IPX8 rating ensures safe continuous submersion, and the long 10 m cable increases installation flexibility. The construction is focused on durability and practical operation in typical drainage and water removal scenarios.

Suitable for

• Draining flooded basements and cellars
• Pond and pool water removal and maintenance
• Water extraction on construction sites and during renovation
• General irrigation or water transfer where immersion is required

Key specifications

• Motor power: 1100 W
• Rated voltage and frequency: 230 V / 50 Hz
• Ingress protection: IPX8 (suitable for continuous submersion)
• Power cable length: 10 m
• Weight: 4.9 kg
• Application type: submersible water pump for drainage and transfer

How to use

Before use, check the power cable and pump body for visible damage. Place the pump fully submerged at the lowest practical point of the water to be removed, ensuring stable positioning on a flat surface. Connect the pump to a 230 V / 50 Hz power supply using a properly grounded socket or a residual-current device (RCD) as required by local regulations. Monitor operation periodically and avoid running the pump dry. After use, disconnect from the mains, remove the pump from the water, drain any residual water, and store the unit in a dry place.

Usage recommendations

For safe and durable operation, use appropriate strainers or inlet filters to prevent large debris from entering the pump. Avoid abrasive or chemical-laden liquids that could damage internal components. Use a residual-current device (RCD) and ensure the electrical installation is suitable for outdoor or wet-area equipment.