Water pump Flo 79812 — 1000 W, 230 V, IPX4, 1.2 m cable, 6.3 kg

Flo 79812 is a mains-powered water pump rated at 1000 W for 230 V / 50 Hz supply. Designed for pumping clean water, it offers IPX4 splash protection, a 1.2 m power cable and a compact form factor with a weight of 6.3 kg and dimensions of 35 x 18 x 24 cm. The pump delivers a maximum flow of 3800 dm3/h, a maximum head of 44 m and a maximum discharge pressure of 4.4 bar, making it suitable for domestic water transfer, light irrigation and drainage tasks where a robust, electrically driven solution is required.

Advantages

Flo 79812 combines relatively high hydraulic performance with a lightweight, portable design that simplifies installation and relocation. The IPX4 splash protection reduces risk in environments where occasional water spray may occur, while the 1000 W motor provides sufficient power for a range of circulation, supply and drainage duties. Compact dimensions and a short 1.2 m cable make the pump convenient for confined spaces and straightforward connections to standard 25.4 mm water fittings.

Suitable for

• Domestic water transfer and garden irrigation
• Filling and circulating water in fountains and small water features
• Drainage of basements, utility areas and construction pits (clean water only)
• Temporary water supply for light commercial or workshop tasks

Key specifications

• Power: 1000 W
• Supply voltage: 230 V, 50 Hz
• Protection rating: IPX4 (splash resistant)
• Maximum flow (performance): 3800 dm3/h
• Maximum head: 44 m
• Maximum discharge pressure: 4.4 bar
• Maximum suction depth: 8 m
• Maximum water temperature: 35 °C
• Water pipe diameter: 25.4 mm
• Dimensions (L×W×H): 35 × 18 × 24 cm
• Weight: 6.3 kg
• Power cable length: 1.2 m

How to use

Install the Flo 79812 on a stable, level surface above the intended suction point or use appropriate mounting for horizontal placement. Connect inlet and outlet hoses to compatible 25.4 mm fittings and ensure all connections are secure and watertight. Connect the pump to a 230 V mains supply using the built-in 1.2 m cable and a properly rated socket. Prime the pump or ensure the suction line is filled with water if required by the application. Operate within the specified maximum water temperature and suction depth, and avoid pumping fluids containing solids or aggressive chemicals.

Usage recommendations

For reliable long-term operation, use the pump only with clean water, protect the unit from prolonged exposure to heavy spray or direct jets, and avoid running dry. Periodically inspect hoses, seals and connections for wear or leaks. If the installation requires longer cable length or permanent hardwiring, have an authorized electrician perform the work following local regulations.