Submersible Pump Gardena 9034-61

The Gardena 9034-61 submersible pump is a stainless steel water pump designed for high-capacity drainage and water transfer tasks. Equipped with a 450 W motor, the pump delivers a maximum flow rate of 11,000 l/h and is capable of operating while submerged to a depth of up to 7 m. With a maximum delivery head of 7 m and a 10 m power cable, this model is suitable for moving large water volumes in domestic and outdoor environments where durability and continuous operation are required.

Advantages

Constructed with corrosion-resistant stainless steel, the pump offers enhanced durability and reduced maintenance compared with less robust materials. The 450 W motor provides reliable power for sustained pumping of large water quantities while the 10 m cable gives flexibility in positioning the unit. The ability to operate at immersion depths up to 7 m and deliver water to heights up to 7 m makes the unit suitable for both shallow and relatively deep drainage tasks. The design balances performance and build quality to support frequent use in demanding conditions.

Suitable for

• Draining flooded basements, cellars and garages
• Emptying and maintaining garden ponds and swimming pools
• Transferring large volumes of rainwater or irrigation water
• Temporary site dewatering and water removal around buildings

Key specifications

• Motor power: 450 W
• Maximum pumping capacity: 11,000 liters per hour
• Maximum immersion depth: 7 meters
• Maximum delivery head (height): 7 meters
• Cable length: 10 meters
• Housing material: stainless steel

How to use

Place the pump on a stable surface at the lowest point of the area to be drained and ensure the unit is fully submerged within the maximum immersion depth. Connect the power plug to a properly rated and protected electrical outlet, observing local safety regulations and using a ground-fault circuit interrupter (GFCI) where required. Attach the discharge hose to the outlet connection and secure it to prevent leaks. Start the pump and monitor the operation, ensuring the intake remains free of large debris. After use, disconnect power, remove the pump from the water, and allow it to drain and dry before storage.

Usage recommendations

Before each use, inspect the pump, cable and connections for damage. Use strainers or pre-filters to prevent large particles from entering the pump, and avoid running the pump dry. For long-term storage, clean and dry the pump and store it in a frost-free environment. Follow local electrical safety rules and consult the user manual for specific maintenance intervals and troubleshooting.