Flat Sponge Brush 40 mm, GDD, pack of 12 – foam applicator for paint and varnish

Flat Sponge Brush 40 mm by GDD comes in a practical pack of 12 foam applicators designed for applying paints, primers, varnishes and wood treatments. Each unit has a 40 mm wide flat foam head mounted on a lightweight handle, intended to provide smooth coverage, neat edging and accurate touch-ups on wood, furniture and small craft surfaces. These disposable applicators can be cleaned for limited reuse depending on the applied material and cleaning method.

Advantages

The foam head delivers even distribution of liquids with minimal streaking and is suitable for low-viscosity paints and clear finishes. The compact flat shape allows access to narrow gaps and straight edges while the single-use option reduces cross-contamination between different coatings. The pack of 12 ensures consistent applicators for multiple tasks or for replacing worn heads during a project.

Suitable for

• Applying primers and water-based paints to small wood surfaces
• Spreading varnish and clear coats on furniture and trims
• Touch-ups and edging on craft and DIY projects
• Applying wood treatments, stains or sealers in narrow areas

Key specifications

• Foam head width: 40 mm
• Head shape: flat
• Pack quantity: 12 pieces
• Recommended materials: low- to medium-viscosity paints, primers, varnishes and wood treatments
• Handle type: lightweight disposable handle

How to use

Dip the flat sponge head lightly into the coating and remove excess on the container rim to avoid drips. Apply with smooth, even strokes following the grain of the substrate when working on wood. For edging and touch-ups, use the flat side for broad coverage and the edge of the foam for narrow lines or corners. After use with water-based products, rinse thoroughly until the foam runs clear if you intend to reuse the brush; dispose of the applicator if cleaning is not effective or the foam is degraded.

Usage recommendations

Test the applicator on a scrap piece before starting the main surface to confirm finish appearance and absorption. Use separate applicators for different coatings to prevent color contamination. Store unused foam brushes in a dry place away from direct sunlight to maintain foam integrity.