Submersible Oil Pump GEKO G00940 12V, 52 mm inlet

Submersible oil pump GEKO G00940 12V with a 52 mm inlet is a compact, immersion-capable pump intended for transferring oil and comparable fluids. Powered from a 12 V source, the unit is designed for use in vehicle maintenance, oil changes and extraction of fluids from tanks or sumps. The construction allows direct immersion in oil and enables portable operation where mains power is not available.

Advantages

The pump combines a 12 V drive with a 52 mm inlet to provide straightforward connection to standard filler necks and drain points. Its compact design simplifies handling and positioning inside tanks or sumps, while the submersible configuration reduces the need for complex external suction arrangements. The device is suitable for oil and similar hydraulic or lubricating fluids, providing a practical solution for mobile or workshop use.

Suitable for

• Draining engine oil from cars, motorcycles and small commercial vehicles
• Transferring oil from storage tanks and containers
• Fluid removal from sumps, gearboxes and hydraulic reservoirs
• Field or roadside maintenance where 12 V power is available

Key specifications

• Power supply: 12 V DC for connection to vehicle battery or compatible 12 V source
• Inlet diameter: 52 mm for compatibility with common filler necks and openings
• Design: submersible/immersion-capable construction suitable for use inside oil
• Application fluid: intended for oil and similar lubricants or hydraulic fluids
• Form factor: compact and portable for workshop and mobile use

How to use

Before use, ensure the power source is compatible and the pump wiring is connected securely to the 12 V supply following vehicle or battery manufacturer guidance. Place the pump fully submerged in the oil or fluid to be transferred, align the 52 mm inlet with the opening where required, and start the unit from the connected 12 V source. Monitor the transfer process, avoiding dry running and ensuring the outlet route is clear. After completion, disconnect from the power source, remove the pump from the fluid and allow excess oil to drain back before storage. Follow usual safety precautions for handling oils and batteries.

Usage recommendations

Use the pump only with fluids it is designed for (oil and similar lubricants). Avoid pumping aggressive chemicals or water unless explicitly specified by the manufacturer. Regularly check electrical connections and inspect the pump for wear or contamination. Clean and store the pump in a dry place when not in use to prolong service life.