Gekо automatic hose connector T-type for PU/PE hose, 8 mm (pack options 25/50/1000) by GEKO

The Geko automatic hose connector T-type for PU/PE hose, 8 mm is a three-way quick connector made for small-diameter irrigation and low-pressure fluid lines. Intended for use with 8 mm inner-diameter polyurethane (PU) and polyethylene (PE) hoses, this T-connector creates a secure branching point without tools. Available in bulk pack options (25, 50 or 1000), it is suitable for installation, repair or extension of garden drip systems, micro-irrigation lines and other low-pressure hose networks.

Advantages

This T-type connector offers tool-free, fast assembly and disassembly, reducing installation time for irrigation layouts. Its design ensures a compact three-way split with minimal flow restriction in small-diameter hoses. The connector is compatible with common PU and PE materials used in garden micro-irrigation and is supplied in multiple pack sizes for commercial or large-scale projects. The construction provides a reliable push-fit connection that helps prevent accidental disconnections under normal low-pressure conditions.

Suitable for

• Branching 8 mm PU or PE drip irrigation lines in gardens and greenhouses
• Repairing or extending small-diameter feeding hoses for sprinklers, emitters or misting systems
• Low-pressure fluid delivery in horticulture, nurseries or small agricultural setups
• Commercial installations requiring bulk components for repetitive fittings

Key specifications

• Connector type: T-type three-way
• Compatible hose inner diameter: 8 mm
• Compatible hose materials: polyurethane (PU) and polyethylene (PE)
• Connection method: push-fit / automatic
• Intended pressure range: low-pressure irrigation applications
• Pack options: bulk packs of 25, 50 or 1000 pieces

How to use

Cut the 8 mm PU/PE hose end square and clean any debris before insertion. Push each hose end firmly into the corresponding leg of the T-connector until it seats and the push-fit locking mechanism engages. Verify that hoses are fully inserted by a slight pull test and align the connector to avoid sharp bends at the joint. For removal, depress the sleeve (if present) or pull out the hose while supporting the connector to avoid damage to the hose end.

Usage recommendations

Use the connector only with hoses that match the specified 8 mm inner diameter and are made of compatible PU or PE materials. Avoid use in high-pressure systems or with hot liquids. When installing in exposed outdoor locations, check fittings periodically for wear, UV degradation of hoses, and secure seating to maintain leak-free performance.