Paint Roller Sleeve GEKO flock 7 cm pile 30 mm bore 6 mm

Replacement paint roller sleeve GEKO flock 7 cm pile 30 mm bore 6 mm is a compact roller cover designed for small-scale painting and touch-up work. The flock fabric and 30 mm pile height provide uniform paint pickup and controlled release, making it suitable for applying paints and varnishes on trims, furniture, radiators and other confined surfaces. The 7 cm working width and 6 mm inner bore allow use with compatible mini roller frames for accurate, low-splatter application on smooth to semi-smooth substrates.

Advantages

This GEKO flock roller sleeve offers consistent coverage and reduced splatter thanks to its dense flock surface and moderate pile length. Its compact 7 cm width enables precise work in tight areas, while the 6 mm bore ensures a secure fit on standard mini roller frames. The flock material is appropriate for both water-based and solvent-based paints and varnishes, helping to achieve a smooth finish on small surfaces and detail elements.

Suitable for

• Touch-ups and detail painting on furniture and trim
• Painting radiators, window frames and door edges
• DIY renovation tasks in confined or narrow areas
• Applying varnish and paint on smooth to semi-smooth surfaces

Key specifications

• Working width: 7 cm
• Pile (nap) height: 30 mm
• Inner bore diameter: 6 mm
• Cover material: flock fabric
• Designed use: paints and varnishes on small surfaces

How to use

Fit the roller sleeve onto a compatible mini roller frame with a 6 mm shaft until it is seated securely. Pour paint or varnish into a tray, load the sleeve evenly by rolling across the tray grid, and remove excess by rolling on the tray lip. Apply with steady, overlapping strokes for uniform coverage and finish edges and corners carefully using the sleeve’s narrow width. Clean the sleeve according to the paint type before storage to prolong service life.

Usage recommendations

For best results use with high-quality trays and a compatible 6 mm mini frame. Rinse immediately after use when working with water-based paints; use appropriate solvents for solvent-based coatings. Replace the sleeve if the flock becomes worn or matts to maintain consistent application.