Anvil Pruning Shears GEKO G72020 — two-handed secateurs for woody branches

Anvil pruning shears GEKO G72020 — two-handed secateurs for woody branches are hand tools designed for cutting and pruning hard, dry and dead wood in gardens, orchards and around shrubs. The anvil-style cutting mechanism uses a single sharp blade that closes onto a flat anvil surface, producing controlled cuts on thicker, woody stems. These secateurs are intended for tasks where a firm, straight cut is required and where bypass shears would struggle with dense or dry material.

Advantages

The anvil configuration simplifies cutting of very hard or dead wood by compressing the material against a flat surface, which reduces blade slipping and allows greater cutting force with minimal hand positioning adjustments. Two-handed operation increases leverage and makes it easier to cut thicker branches with less fatigue. The simple blade-and-anvil design is durable and requires less frequent sharpening compared with fine bypass blades when used on dry wood.

Suitable for

• Cutting and removing dead or dry branches
• Pruning fruit trees and orchard maintenance
• Shaping and maintaining shrubs with thicker stems
• Garden maintenance where controlled, blunt-force cuts are preferred

Key specifications

• Tool type: anvil pruning shears (two-handed secateurs)
• Cutting mechanism: single cutting blade closing onto a flat anvil
• Intended material: woody, hard, or dead branches
• Operation: two-handed leverage for increased cutting force
• Typical use case: garden, orchard, shrub maintenance

How to use

Position the anvil shears so the branch rests against the flat anvil surface and the cutting blade aligns with the intended cut line. Use both hands to apply steady pressure on the handles, increasing leverage as needed to close the blade completely through the wood. For safety, cut branches at an angle appropriate for the plant species and avoid twisting motions. After cutting, inspect the blade and anvil for lodged debris and remove any wood fragments to maintain clean operation.

Usage recommendations

Wear protective gloves and eye protection when cutting. Use anvil shears primarily on dry or dead wood and avoid prolonged use on green, fibrous stems where bypass shears produce cleaner cuts. Keep the blade clean and occasionally lubricate hinge points; sharpen or replace the cutting blade when it becomes dull to maintain efficient, safe cutting performance.