Technical Hose GEKO G73701, reinforced 8×2.5 mm, available in 1 m segments and 50 m roll

Reinforced technical hose GEKO G73701 with an internal/external diameter profile of 8×2.5 mm is supplied in 1 m segments and as a 50 m roll. The hose is intended for general-purpose fluid transfer and light-duty applications where a compact, flexible, reinforced hose is required. Reinforcement provides improved mechanical strength and resistance to kinking while the compact cross-section makes it suitable for installations with limited space. The hose is compatible with routine workshop, garden irrigation and light industrial tasks that require a small-diameter reinforced line.

Advantages

The GEKO G73701 reinforced technical hose combines flexibility with reinforcement for enhanced durability and resistance to mechanical wear. Supplied both as 1 m segments and a continuous 50 m roll, it allows for easy selection of the needed length and straightforward cutting to size for installation. Its small 8×2.5 mm profile simplifies routing in tight spaces and reduces coil memory for easier handling and storage.

Suitable for

• Garden irrigation and drip systems with small-diameter lines
• Workshop applications such as air lines for light pneumatic tools or fluid transfer
• Light industrial transport of non-aggressive liquids
• Prototyping and custom installations requiring short lengths or continuous runs

Key specifications

• Internal/external diameter profile: 8×2.5 mm
• Material: reinforced technical hose construction (reinforcement for mechanical strength)
• Available lengths: 1 m segments and 50 m roll
• Flexibility: compact, low-profile flexible hose suitable for tight routing
• Typical uses: fluid transfer, garden irrigation, workshop applications, light industrial use

How to use

Measure the required length and cut the hose cleanly with an appropriate cutting tool to ensure straight ends. Fit suitable connectors or hose fittings sized for an 8×2.5 mm profile, taking care to secure fittings with clamps or compression sleeves where required. For long runs, unroll the 50 m roll and allow the hose to relax before final routing to reduce coil memory. Inspect ends and fittings for leaks after pressurising the system and make any necessary adjustments.

Usage recommendations

Use the hose for non-corrosive fluids and applications within the mechanical and pressure limits typical for small reinforced technical hoses. Avoid exposure to aggressive chemicals, excessive heat, or prolonged direct sunlight if not specified by the system requirements. Store rolled or coiled in a dry place out of direct sunlight and check fittings periodically for wear.