Submersible dirty water pump GEKO WQD-10-8-0,55 with grinder (G81424) 0.55 kW

The GEKO WQD-10-8-0,55 submersible dirty water pump with grinder (model G81424) is designed to handle contaminated and particle-laden water where coarse debris is present. Equipped with a 0.55 kW motor and an integrated macerator, the pump provides reliable removal of water containing sand, silt, leaves, and other solids. Its construction allows use in dewatering tasks for garden ponds, flooded basements, construction sites and other situations requiring effective wastewater handling.

Advantages

The integrated grinder reduces solid particles to smaller fragments, helping prevent blockages in hoses and discharge lines and enabling smooth continuous or intermittent operation. The motor power of 0.55 kW offers a balance between pumping capacity and energy consumption. Durable housing materials and a design suitable for dirty water make the unit resilient to abrasive particles and common debris. The compact submersible format simplifies installation and relocation.

Suitable for

• Dewatering garden ponds and water features with organic debris
• Pumping out flooded cellars and garages containing mud and small solids
• Construction site drainage where water contains gravel, sand or silt
• Temporary wastewater removal from basins or tanks with suspended solids

Key specifications

• Motor power: 0.55 kW
• Type: submersible dirty water pump with integrated grinder
• Application: contaminated water with solids, dewatering and wastewater removal
• Design: compact submersible housing suitable for immersion
• Operation: suitable for continuous or intermittent use depending on conditions

How to use

Place the pump on a stable, level surface within the water to be removed, ensuring the inlet is not blocked by large immovable objects. Connect appropriate discharge hose or pipe to the outlet and secure fittings to prevent leakage. Ensure the power supply matches the pump motor requirements and use a protected electrical circuit with residual-current device where applicable. Start the pump and monitor initial operation to confirm the grinder is effectively macerating solids and that discharge flow is unobstructed. Avoid running the pump dry and stop operation if unusual noise or vibration occurs.

Usage recommendations

Before each use, inspect the pump inlet and grinder area for large debris that could overload the macerator. For prolonged reliability, periodically flush the pump with clean water after use in heavily contaminated conditions and store the unit in a dry, frost-free location. When operating in construction or highly abrasive environments, check seals and bearings at regular service intervals as specified by the manufacturer.