Fuel Hose Godmar rubber reinforced 3-layer Ø6.3 mm per 1 m (10 m coil)

Godmar rubber reinforced 3-layer fuel hose with a 6.3 mm inner diameter, sold by the meter from a 10 m coil. The hose is designed for the transfer of fuels and oils and combines a flexible elastomer inner tube with a reinforcing layer and an outer rubber jacket to provide resistance to fuel, oil and mechanical wear while remaining easy to route in confined spaces.

Advantages

The three-layer construction provides mechanical reinforcement and fuel resistance while maintaining flexibility. The 6.3 mm inner diameter fits common small-engine fittings and carburetor lines. Supplied from a 10 m coil and sold per metre, it allows precise length selection for repair or installation without excess waste.

Suitable for

• Fuel lines for small engines and garden equipment
• Carburetor and primer bulb connections
• Replacement and repair of short fuel or oil feed hoses
• Workshop and DIY fuel-system maintenance tasks

Key specifications

• Inner diameter: 6.3 mm
• Construction: rubber, 3-layer reinforced
• Material compatibility: fuels and oils
• Supply format: sold per 1 m from a 10 m coil
• Characteristics: flexible, mechanically reinforced, fuel-resistant

How to use

Measure the required length and cut the hose cleanly with a sharp blade or hose cutter to ensure a straight end. Fit the hose onto the fuel outlet, inlet or fitting and secure with an appropriate clamp sized for 6.3 mm inner diameter to prevent leaks. Route the hose away from hot surfaces and sharp edges; avoid kinking by using gentle bends and, where necessary, support with clips or ties.

Usage recommendations

Use the hose only with fuels and oils compatible with rubber materials. Replace hoses showing hardening, cracking, swelling or fuel permeation. For pressurised systems or high-temperature applications, verify suitability with local regulations and equipment manufacturer requirements before installation.