Network patch cord GOOBAY RJ45 CAT 6A S/FTP (PiMF) with CAT7 cable, 500 MHz, 1.5 m, violet

GOOBAY RJ45 CAT 6A S/FTP (PiMF) patch cord with CAT7 raw cable, 1.5 m length and 500 MHz bandwidth provides a shielded, high-performance connection for Ethernet networks. The cable combines CAT7 cable construction with CAT6A RJ45 terminations, gold‑plated contacts and LSZH halogen‑free jacket to support stable data transfer rates up to 10,000 Mbit/s. S/FTP shielding (foil around each pair plus overall braid) and high‑quality copper conductors ensure signal integrity in environments with electromagnetic interference. The cable is finished in violet and features latch protection and bend relief on the RJ45 plugs.

Advantages

The double‑shielded S/FTP design with pair‑individually wrapped foil and an overall braid reduces crosstalk and external interference, supporting reliable high‑speed links. Gold‑plated 50 µ contacts and copper conductors provide low contact resistance and corrosion resistance for stable connections. The LSZH halogen‑free sheath reduces hazardous emissions in case of fire and the robust jacket plus bend protection increase mechanical durability in racks and patch panels. The combination of CAT7 raw cable and CAT6A RJ45 termination supports 10 Gigabit Ethernet and PoE applications while maintaining compatibility with CAT6A ports.

Suitable for

• Structured cabling in office or data center environments
• Connecting servers, switches and patch panels in racks
• High‑speed Ethernet links for gaming consoles and media devices
• Applications requiring Power over Ethernet (PoE / PoE+)

Key specifications

• Cable category: CAT7 raw cable with CAT6A RJ45 termination
• Shielding: S/FTP (foil around individual pairs - PiMF, plus overall braid)
• Bandwidth: 500 MHz (RJ45/CAT6A termination)
• Data rates: up to 10,000 Mbit/s (10 Gigabit Ethernet)
• Conductor material: copper (CU)
• Contacts: 50 µ gold‑plated RJ45 contacts
• Connector type: RJ45 straight male to RJ45 straight male
• Length: 1.5 m
• Jacket: LSZH halogen‑free sheath
• Color: violet

How to use

Insert each RJ45 plug firmly into the corresponding network port until the latch clicks into place. Route the cable to avoid tight bends or sharp edges; make use of the built‑in bend relief and avoid kinking to preserve performance. For installation in patch panels or switch ports, ensure connectors are fully seated and that shielding continuity is maintained by using compatible shielded ports or adapters. If used for PoE devices, verify the power class and switch or injector settings to match device requirements.

Usage recommendations

For optimal performance, use this cable in shielded environments with compatible S/FTP or shielded RJ45 ports, avoid running the cable parallel and close to high‑voltage power lines, and keep bend radius greater than the manufacturer’s recommendations to maintain 10 Gigabit throughput and shielding effectiveness.