Network cable Hikvision DS-1LN5EUEC7 grey 305 m UTP Cat5e solid conductor outdoor LAN

Hikvision DS-1LN5EUEC7 grey 305 m UTP Cat5e solid conductor outdoor LAN is a 305-metre unshielded twisted pair (UTP) cable manufactured to Cat5e specifications. The cable uses solid copper conductors and a grey outer jacket suitable for visible runs or conduit and is intended for Ethernet and low-voltage data applications where a single, continuous solid-core cable is preferred. It is designed for horizontal cabling, CCTV network links and general LAN installations that require Cat5e performance over short to medium distances.

Advantages

The cable provides stable signal transmission for 10/100 Mbps Ethernet and typical Cat5e applications thanks to its solid conductors and consistent twist rate. The grey jacket offers neutral appearance for indoor visible installations and protects the internal pairs against environmental exposure when used in conduit or sheltered outdoor runs. Its 305 m length on a single drum reduces the number of splices or joins required for continuous runs, and the UTP design avoids the need for additional shielding where electromagnetic interference is limited.

Suitable for (tasks / use cases)

• Horizontal LAN cabling in offices, server rooms and residential properties
• CCTV and IP camera network links where Cat5e is sufficient
• Conduit or sheltered outdoor runs where a solid-core cable is needed
• Patch panel to wall outlet backbone that requires continuous solid conductors

Key specifications

• Cable type: UTP (unshielded twisted pair)
• Category: Cat5e
• Conductor: solid copper cores
• Length: 305 metres
• Jacket colour: grey
• Typical supported speeds: 10/100 Mbps Ethernet (Cat5e)
• Application environment: horizontal cabling, conduit, sheltered outdoor use

How to use

Install the cable by routing it through conduit, cable trays or along walls according to local wiring standards. Terminate the solid conductors at RJ45 outlets, patch panels or camera modules using compatible punch-down or crimping tools designed for solid core cables. Maintain appropriate bend radius and avoid sharp kinks; follow recommended pulling tension limits to prevent conductor damage. For outdoor exposures, run the cable in conduit or protected pathways to shield the jacket from direct sunlight and moisture.

Usage recommendations

Use this UTP Cat5e solid-core cable for structured cabling where continuous runs and stable signal integrity are required. For environments with significant electromagnetic interference or where outdoor exposure is unprotected, consider shielded cable variants or additional protective conduit. Terminate with hardware rated for solid conductors and test each run with a cable certifier or continuity tester to confirm proper wiring and performance.