PoE Switch Hikvision DS-3E0105P-E/M(C) 4-port, 4x 10/100 Mbps PoE + 1x uplink

Hikvision DS-3E0105P-E/M(C) is a compact 4-port PoE Ethernet switch with four 10/100 Mbps PoE data ports and one uplink port. It provides both power and data over standard Ethernet cabling, enabling simple deployment of IP cameras and wireless access points without separate power supplies. The switch is intended for small-scale surveillance and network aggregation where basic plug-and-play PoE capability and reliable wired connectivity are required.

Advantages

The switch combines small footprint and straightforward installation with PoE power delivery on each 10/100 Mbps data port, reducing cable clutter and eliminating the need for external injectors. Its dedicated uplink port enables easy connection to a router, NVR or larger switch for network expansion. The device supports automatic link negotiation for connected devices, allowing compatible cameras and access points to operate without manual configuration.

Suitable for

• Small IP camera systems for homes or small businesses
• Indoor wireless access point deployments requiring PoE
• Edge aggregation where a compact PoE switch is needed
• Temporary or permanent installations with limited rack or shelf space

Key specifications

• Number of PoE data ports: 4
• Data speed per PoE port: 10/100 Mbps
• Uplink ports: 1 x 10/100 Mbps
• PoE standard and power budget: supports standard PoE delivery suitable for typical IP cameras and APs (consult device power requirements)
• Form factor: compact desktop or shelf-mountable unit
• Operation: plug-and-play with automatic link negotiation and basic network aggregation

How to use

Install the switch on a stable surface near your network equipment. Connect the uplink port to your router, NVR or upstream switch using standard Ethernet cable. Plug your PoE-capable IP cameras or access points into the PoE data ports; the switch will deliver both power and data over a single cable. Ensure connected devices are within the supported power limits and use appropriate Category 5e or better Ethernet cabling for optimal 10/100 Mbps performance. After physical connections are made, verify link LEDs to confirm network and power status.

Usage recommendations

Use this switch for small deployments where simple, reliable PoE delivery is needed. Confirm individual device power consumption to avoid exceeding the total available PoE budget. Place the switch in a ventilated, dry environment and protect it with basic surge protection if exposed to unstable power conditions.