Unmanaged switch HP Enterprise Instant On 1430 8G 64W — 8x RJ-45 10/100/1000 PoE Class 4, 16 Gbps switching

HP Enterprise Instant On 1430 8G 64W is an unmanaged Ethernet switch that provides eight RJ-45 ports with 10/100/1000 Mbps connectivity and PoE Class 4 support. With a total PoE power budget of 64 W, the device enables plug-and-play deployment of powered devices such as wireless access points, IP phones and network cameras. The switch offers a switching capacity of 16 Gbit/s, throughput up to 11.90 Mpps, 128 KB EEPROM and a 2 MB packet buffer, making it suitable for small office or branch deployments where simple, reliable powered connectivity is required.

Advantages

The unmanaged design eliminates the need for configuration, allowing immediate use after installation. PoE Class 4 support across the eight Gigabit ports allows simultaneous powering of multiple PoE devices while the 64 W total budget balances power distribution within typical small-network deployments. Hardware buffering and EEPROM provide stable packet handling and basic device information storage, while the 16 Gbit/s switching capacity ensures wire-speed performance for typical 8-port traffic patterns.

Suitable for

• Small office and home office networks requiring PoE for access points and IP phones
• Compact surveillance setups with a few PoE cameras
• Branch or satellite sites where plug-and-play connectivity is preferred
• Environments needing additional Gigabit ports to connect wired workstations and network devices

Key specifications

• 8 × RJ-45 ports, 10/100/1000 Mbps
• PoE support: Class 4 on PoE-capable ports
• Total PoE power budget: 64 W
• Switching capacity: 16 Gbit/s
• Forwarding throughput: up to 11.90 Mpps
• Packet buffer: 2 MB
• EEPROM: 128 KB
• Unmanaged, plug-and-play operation

How to use

Install the switch on a flat surface or in a rack-compatible location following the manufacturer’s mounting instructions. Connect the switch to your network uplink using any Gigabit RJ-45 port, then connect PoE devices such as access points, IP phones or cameras to the remaining ports. Ensure the total power draw of connected PoE devices does not exceed the 64 W budget; the switch will deliver PoE power automatically to supported devices. Use standard Ethernet cabling (Cat5e or higher) for Gigabit performance and reliable PoE delivery.

Usage recommendations

For balanced performance, distribute high-power PoE devices across ports to avoid concentrating power draw on adjacent ports. Verify device power requirements before connecting multiple cameras or access points to ensure the combined consumption stays within the 64 W budget. Place the switch in a well-ventilated area and use quality Cat5e/Cat6 cables to maintain Gigabit throughput and stable PoE operation.