Hurt-net SIPO-SBS-WPO1 wall protective pads set — 4 pieces for gates

Hurt-net SIPO-SBS-WPO1 wall protective pads set consists of four individual pads designed to be mounted on walls near gates and gates’ contact points. These pads provide a cushioned surface that reduces impact and prevents scratches, dents or paint damage on masonry, plaster or painted surfaces. Supplied as a pack of four, the set is intended for simple installation around gate frames, hinge areas and stops in both residential drives and light commercial entrances.

Advantages

The pads deliver localized protection by absorbing shocks from gate movement and contact, decreasing maintenance needs for wall finishes. Their compact form factor allows discreet placement while covering vulnerable contact zones. The set format of four pieces ensures coverage for multiple points around a single gate or for use on two smaller openings, and the construction is suitable for repeated compression without rapid deformation.

Suitable for

• Protecting walls around driveway or pedestrian gates
• Cushioning hinge and latch contact points
• Use on plaster, masonry or painted surfaces to prevent impact marks
• Small commercial entrances and residential properties

Key specifications

• Set contents: 4 wall pads designed for gate contact protection
• Application: wall-mounted cushioning for gate frames, hinges and stops
• Material behavior: compressible to absorb impact and reduce surface damage
• Suitable surfaces: masonry, plaster, painted walls and similar finishes
• Intended use: residential and light commercial entrance areas

How to use

Select mounting locations where the gate or its hardware contacts the wall—typical positions include beside hinges, at catches or along stop points. Clean the wall surface of dust, loose paint and grease, then position the pad and fasten according to the chosen fixing method (adhesive or mechanical fasteners). Ensure the pad is aligned with the contact point and test gate movement to confirm effective cushioning and full range of motion. Replace individual pads if they show significant wear or permanent deformation over time.

Usage recommendations

For secure and long-lasting attachment, use appropriate wall anchors or construction-grade adhesive compatible with the wall material. Periodically inspect the pads for compression set or surface damage and clean with a mild detergent if contaminated. Avoid exposure to strong solvents or sharp objects that could compromise the pad material.