Antisplash Paste IDEAL SPAW MIX PW-100 0.3 kg – welding antisplash compound

IDEAL SPAW MIX PW-100 antisplash paste (0.3 kg) is a welding consumable formulated to reduce spatter and splashes during arc welding. Applied to joint edges and surrounding surfaces prior to welding, the paste creates a temporary barrier that limits molten metal deposition on fixtures and workpieces. The product is designed for use in both workshop and on-site metal fabrication and repair, helping to reduce post-weld cleanup and protecting adjacent surfaces from welding debris.

Advantages

The antisplash paste reduces the amount of welding spatter that adheres to surfaces near the weld, which lowers time spent on grinding and finishing after welding. Its paste consistency ensures controlled application and adhesion to vertical and horizontal surfaces. In addition, the product is supplied in a compact 0.3 kg container that is convenient for transport and storage on the job site.

Suitable for

• Arc welding operations where spatter control is needed
• Metal fabrication and assembly in workshops
• On-site repair and maintenance of metal structures and equipment
• Welding of steel components that require reduced post-weld cleanup

Key specifications

• Form: viscous paste suitable for brush or spatula application
• Net weight: 0.3 kg per container
• Application temperature: suitable for use under typical welding conditions
• Compatibility: intended for use with common arc welding processes on steel

How to use

Clean the surfaces to be protected from oil, grease and loose scale before application. Apply a thin, even layer of the paste to joint edges and adjacent areas using a brush or spatula; avoid excessive buildup that could contaminate the weld zone. Allow the applied layer to remain in place during welding; the product will act as a temporary barrier and can be removed after the weld has cooled. Follow standard welding safety procedures while preparing and working with the product.

Usage recommendations

For best results, test a small area to confirm compatibility with the specific welding process and base material. Store the product in a dry place at moderate temperature and reseal the container after use to preserve consistency. Do not apply directly into the weld pool or onto surfaces that must be metallurgically bonded; apply only to surrounding areas where spatter prevention is required.