Welding semi-automatic MIG/MAG IDEAL TMIG220V2 30–220A 5.5kW 230V FLUX/MIG-MAG/MMA

The IDEAL TMIG220V2 is a semi-automatic MIG/MAG welding machine designed for workshop and maintenance use. With an operating current range of 30–220 A and rated input power of 5.5 kW on a 230 V supply, the unit supports FLUX, MIG‑MAG and MMA welding methods. It accepts flux-cored and solid wires and is suitable for a wide range of light- to medium-duty metal fabrication, repair and construction tasks where a versatile, single-source welding solution is needed.

Advantages

The machine combines multiple welding processes in one compact cabinet, enabling FLUX, MIG‑MAG and MMA operation without separate devices. Its broad current range from 30 to 220 A covers thin-sheet joining as well as thicker plate welding within the machine’s duty cycle. The 230 V supply requirement simplifies site power needs and makes the unit compatible with standard single-phase workshop outlets. Construction emphasizes straightforward semi-automatic feeding and stable arc characteristics for consistent weld quality with both flux-cored and solid wires.

Suitable for

• Workshop metal fabrication and light production
• Maintenance and repair of machinery, vehicles and structures
• On-site construction and assembly tasks requiring portable welding
• Welding with flux-cored wire where shielding gas is not available
• Manual electrode welding (MMA) for electrode-based repairs

Key specifications

• Operating current range: 30–220 A
• Rated input power: 5.5 kW
• Supply voltage: 230 V single-phase
• Supported welding methods: FLUX, MIG‑MAG, MMA
• Wire compatibility: flux-cored and solid welding wires
• Machine type: semi-automatic feed (MIG/MAG) with MMA capability

How to use

Connect the machine to a stable 230 V supply following local electrical safety regulations. Select the welding mode (FLUX, MIG‑MAG or MMA) appropriate for the filler material and workpiece. Set the current within the 30–220 A range and adjust wire feed speed and voltage settings according to wire diameter and material thickness, consulting the machine’s settings chart if available. For MIG‑MAG use, ensure correct shielding gas selection and flow; for FLUX use, load the appropriate flux-cored wire. Use recommended personal protective equipment and ground the workpiece before starting. Monitor duty cycle limits to avoid overheating and allow the machine to cool as required.

Usage recommendations

For consistent weld quality, match wire diameter and welding current to material thickness, maintain correct arc length, and verify feed tension to prevent wire slipping. When switching between FLUX and solid wire, inspect the drive rolls and liner for contamination. Regularly check connections, gas hoses and contact tips, and perform routine cooling intervals to preserve the unit’s duty cycle and longevity.