Network Cable iGET CAT5E UTP PVC Eca 100m/roll

The iGET CAT5E UTP PVC Eca 100m/roll network cable is a unshielded twisted-pair cable designed for balanced Ethernet and data transmission across local area networks. Supplied on a 100-meter roll, the cable uses CAT5E specifications to support typical 100BASE-TX and 1000BASE-T applications over short to moderate distances. The PVC outer sheath provides mechanical protection and the Eca reaction-to-fire classification indicates compliance with common building-safety requirements for general indoor installations.

Advantages

This cable combines CAT5E electrical performance with an economical PVC jacket, offering consistent attenuation and near-end crosstalk characteristics suitable for structured cabling. The unshielded design simplifies termination with standard RJ45 connectors and reduces installation complexity in environments where additional shielding is not required. A 100 m roll format allows flexible run lengths and easy deployment in home, office or light-commercial network layouts.

Suitable for

• Wired Ethernet connections for desktops, routers and switches
• Structured cabling in residential and small office networks
• Patch panels, wall sockets and horizontal cabling runs
• Temporary or permanent installations where unshielded cable is acceptable

Key specifications

• Cable category: CAT5E
• Pair type: Unshielded twisted pair (UTP)
• Jacket material: PVC
• Reaction to fire class: Eca
• Length per roll: 100 meters
• Typical use: Ethernet, Fast Ethernet, Gigabit Ethernet (within standard distance limits)

How to use

Cut the required length from the 100 m roll and strip the outer PVC sheath to reveal the twisted pairs. Arrange and untwist pairs according to the chosen wiring standard (T568A or T568B), then terminate with compatible RJ45 connectors or punch down onto keystone jacks or patch panels. Ensure proper cable routing to avoid sharp bends, excessive tension, and proximity to strong electromagnetic sources. Verify links with a cable tester after installation to confirm pair continuity and performance.

Usage recommendations

For optimal performance, maintain bend radius at least four times the cable diameter, avoid running parallel to high-voltage power lines, and use appropriate cable management to prevent kinks. In installations requiring increased protection from interference or higher fire-performance ratings, consider shielded or higher-category alternatives.