Network switch IMOU SG108C 8-port Gigabit 10/100/1000 Mbps, unmanaged

The IMOU SG108C is an unmanaged 8-port Gigabit LAN switch that expands wired network capacity for small offices, homes and surveillance setups. Each of the eight RJ45 ports supports Auto-Negotiation at 10/100/1000 Mbps and Auto MDI/MDIX, enabling plug-and-play connectivity without manual cable selection. The compact plastic housing (133.2 x 62 x 21 mm) and lightweight design (79 g) allow desktop placement or wall mounting.

Advantages

The switch delivers a total switching throughput of 16 Gbps and a packet forwarding capability of 1.488 Mpps per port, with a 4 Mb packet buffer and support for 15K jumbo frames. Hardware-based 802.3X Flow Control helps maintain stable data flow under load, and built-in surge protection (2 kV common mode, 1 kV differential) protects connected equipment. Low power consumption (3 W) and simple Plug & Play setup remove the need for configuration.

Suitable for

• Small office wired networks
• Home networks for computers, media streaming and NAS
• Connecting IP cameras and basic surveillance deployments
• Expanding ports for routers and existing switches

Key specifications

• Manufacturer: IMOU
• Model: SG108C
• Ports: 8 x 10/100/1000 Mbps RJ45
• Type: Unmanaged switch
• Switching throughput: 16 Gbps
• Packet forwarding rate: 1.488 Mpps per port
• Packet buffer memory: 4 Mb
• Jumbo frame: up to 15K
• MAC table size: 8K
• Surge protection: Common mode 2 kV; Differential mode 1 kV
• Power supply: DC 5V 1A
• Power consumption: 3 W
• LEDs: 1 x Power, 8 x Link/Act
• Operating temperature: 0 °C to 40 °C
• Operating humidity: 10% to 90%
• Housing: Plastic; Installation: Desk or wall mount
• Dimensions: 133.2 x 62 x 21 mm; Weight: 79 g

How to use

Place the IMOU SG108C on a desk or mount it on a wall and connect its power adapter (DC 5V 1A). Plug Ethernet cables from your router, computers, IP cameras or other devices into the RJ45 ports. The switch will automatically negotiate link speed and duplex, and Auto MDI/MDIX removes the need for crossover cables. Monitor the power and Link/Act LEDs to verify port connectivity.

Usage recommendations

For best results, install the switch in a ventilated, dust-free location within the specified operating temperature and humidity ranges. Use quality Ethernet cables (Cat5e or higher) to ensure Gigabit performance and avoid stacking multiple unmanaged switches in series when possible to reduce potential network bottlenecks.