INFRALAN A-DQ(ZN)B2Y OM3 24G single loose tube 1x24 fiber cable, black, 5.8mm, 2000N tensile

INFRALAN A-DQ(ZN)B2Y OM3 24G single loose tube 1x24 fiber cable is a multimode backbone cable designed for indoor and outdoor installations where OM3 performance is required. The construction uses a single loose tube containing 24 multimode OM3 fibers, covered by a black outer jacket with a nominal diameter of 5.8 mm. The cable is specified with a 2000 N tensile strength rating to withstand pulling forces during installation and to provide long-term strain resistance in building distribution, campus links and data center backbones.

Advantages

This cable combines multimode OM3 optical performance with a compact single loose tube design, enabling high-density fiber routing in trays and conduits. The 5.8 mm black jacket offers a slim profile for easier installation in existing ducts and cable management systems, while the 2000 N tensile rating supports reliable pulling during deployment. Designed for both indoor and outdoor use, the cable is suitable for transitions between external and internal plant when routed through protected pathways.

Suitable for

• Data center backbone and rack-to-rack connections using OM3 multimode fiber
• Campus and building distribution links where high-density 24-fiber routing is needed
• Short to medium reach multimode applications such as 10G/40G connections that rely on OM3 performance
• Protected indoor/outdoor cabling runs through conduits, trays or risers

When it may not be suitable

This cable uses OM3 multimode fibers, so it is not appropriate for long-haul singlemode applications or links that require singlemode performance. It is intended for protected routes; where direct burial, prolonged water immersion, or exposure to mechanical abrasion and sunlight without further protection is expected, a cable with dedicated armoring or UV-resistant outdoor jacket should be selected.

Key specifications

• Fiber type: OM3 multimode, 24 fibers in a single loose tube configuration
• Structure: single loose tube
• Outer diameter: approximately 5.8 mm
• Color: black outer jacket
• Tensile strength: 2000 N (installation/operational pulling resistance)
• Application: indoor/outdoor protected installation, backbone and distribution

How to use

Plan the cable route through protected trays, conduits or risers and verify bend radius and pulling force limits before installation. Use appropriate pulling grips and ensure the applied load does not exceed the 2000 N tensile rating. Terminate fibers using compatible OM3 multimode connectors or splice them in fiber enclosures designed for 24-fiber cables. Maintain recommended minimum bend radius during routing and secure the cable at intervals to avoid strain on terminations and splice points.

What to consider before purchase

• Confirm OM3 multimode fiber meets the required bandwidth and distance for intended network protocols (for example 10G/40G applications)
• Ensure the 5.8 mm diameter and cable jacket type fit existing conduits, trays and cable management systems
• Verify that a 2000 N tensile rating is sufficient for your installation method and pulling distances
• Check whether additional outer protection (armoring, UV-resistant jacket) is needed for exposed outdoor sections

Usage recommendations

Handle the INFRALAN A-DQ(ZN)B2Y OM3 24G cable with standard fiber installation practices: avoid exceeding the tensile rating, keep within minimum bend radius, and perform testing (insertion loss/OTDR) after termination or splicing to confirm link performance.