INFRALAN A-DQ(ZN)B2Y OM4 8G 1x8 Fiber Optic Cable, 2000N, black, 5.8mm

The INFRALAN A-DQ(ZN)B2Y OM4 8G 1x8 Fiber Optic Cable is a single-unit multimode fiber designed for backbone and data center links that require high-bandwidth OM4 performance. The construction uses one central tube containing eight multimode fibers (1x8) inside a 5.8 mm diameter sheath. With a rated tensile strength of 2000 N and a black outer jacket, the cable is intended for indoor and outdoor installation in ducts or trays where multimode transmission and compact dimensions are needed.

Advantages

This cable provides OM4 multimode performance suitable for 10 Gbit/s and higher short-reach applications, with an 8-fiber single-tube design that simplifies routing and termination in backbone and data center environments. The 5.8 mm overall diameter offers a space-saving profile while the 2000 N tensile rating supports reliable installation and strain resistance during pulling. The black outer sheath provides basic UV resistance and visual uniformity for mixed indoor/outdoor runs.

Suitable for

• Data center horizontal and vertical backbone connections
• Campus and building backbone ducts and trays
• Short-reach multimode transmission (OM4) for high-density links
• Fiber consolidation points and splice enclosures requiring 1x8 cables

When it may not be suitable

This cable is multimode OM4 and therefore not appropriate for long-haul single-mode links or applications requiring single-mode transmission. It is optimized for duct or tray installation and may not be ideal for direct-burial scenarios or environments that require special armoring or stronger mechanical protection than a 2000 N tensile rating provides.

Key specifications

• Fiber type: Multimode OM4
• Fiber count and arrangement: 8 fibers in a single central tube (1x8)
• Outer diameter: approximately 5.8 mm
• Tensile strength: 2000 N (installation/pulling)
• Sheath color: black
• Suitable installation: indoor/outdoor in ducts or trays

How to use

Install the cable in cable trays or ducts following standard fiber handling and bend-radius guidelines for multimode OM4 fiber. Use appropriate pulling tension controls and lubricants to avoid exceeding the 2000 N tensile limit during installation. Terminate or splice the individual fibers in a fiber distribution panel or splice enclosure designed for 1x8 cable layouts. Clean and inspect fiber end faces and connectors to ensure low-loss connections and compliance with network performance requirements.

What to consider before purchase

• Confirm whether multimode OM4 fiber meets the link distance and bandwidth requirements for your application
• Verify that a 1x8 fiber arrangement fits your patching, consolidation, and splice enclosure plans
• Ensure the 5.8 mm diameter and 2000 N tensile rating are compatible with your ducts, trays, and pulling equipment
• Check whether additional armoring or a different sheath type is required for direct-burial or exposed outdoor installations

Usage recommendations

Maintain minimum bend radius as recommended for OM4 multimode fiber during routing, avoid sharp bends and kinks, and ensure pulling tension remains below the 2000 N rating. Use proper cleaning and inspection tools for terminations and splices to achieve the intended high-bandwidth performance.