InLine Gigabit Network Switch 24-Port 1Gb/s 1U Metal Fanless

The InLine Gigabit Network Switch 24-Port 1Gb/s 1U Metal Fanless provides 24x 10/100/1000 Mb/s auto-negotiation RJ-45 ports with Auto MDI/MDIX support. Designed for rack mounting in a 1U metal housing, the switch is fanless and delivers a switching capacity of 52 Gbit/s. It supports IEEE 802.3, 802.3u, 802.3ab, 802.3x and 802.3az (Energy Efficient Ethernet) and can learn up to 16K MAC addresses, offering a straightforward solution to upgrade legacy networks to Gigabit performance while reducing power consumption through EEE.

Advantages

The switch combines a compact 1U rackable metal design with fanless operation for quiet, low-maintenance use. Energy Efficient Ethernet (IEEE 802.3az) lowers power usage by adjusting signal intensity according to cable length and link state. With store-and-forward transmission, jumbo frame support and hardware flow-control (IEEE 802.3x), the device ensures reliable packet handling and compatibility with standard Ethernet cabling up to 100 m. LED indicators show link/activity, speed and power status for easy monitoring.

Suitable for

• Small and medium-sized business network edge switching
• Office rack installations requiring a 1U fanless switch
• Upgrading legacy 10/100 networks to Gigabit Ethernet
• Environments needing energy-efficient, low-noise network equipment

Key specifications

• Ports: 24x 10/100/1000 Mb/s auto-negotiation RJ-45 (Auto MDI/MDIX)
• Switching capacity: 52 Gbit/s
• MAC address table: up to 16K entries
• Chipset: RTL8382L + 2x RTL8218D + 2x RTL8231
• Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3az (EEE)
• Transmission method: Store-and-forward
• Frame forwarding rates: 10 Mb/s – 14,880 pps; 100 Mb/s – 148,800 pps; 1000 Mb/s – 1,488,000 pps
• LEDs: LINK/ACT/SPEED (green), Power (red)
• Dimensions (W×D×H): 440 × 180 × 44 mm (19" housing, 1U)
• Operating temperature: 0 °C to 40 °C; storage: −10 °C to 70 °C
• Humidity: operating 10%–90% non-condensing; storage 5%–90% non-condensing
• Power supply: AC 100–240 V, 50/60 Hz internal; max. power consumption 21 W
• Cable support: 10Base-T (UTP Cat3–5), 100Base-TX (UTP Cat5/5e+), 1000Base-T (UTP Cat5e+), max. 100 m

How to use

Mount the switch in a 19" rack using the included 19" brackets or place it on a flat, stable surface. Connect each network device to the RJ-45 ports using appropriate Ethernet cables (Cat5e or higher for Gigabit speeds). Plug the power cord into an AC 100–240 V outlet. The LEDs indicate power status and link/activity; after power-up the switch operates in unmanaged mode and performs auto-negotiation and Auto MDI/MDIX on each port automatically. No additional configuration is required for basic switching functions.

Usage recommendations

For optimal performance, use Cat5e or higher cables for Gigabit connections and keep cable runs within 100 m. Install the switch in a well-ventilated rack or cabinet, avoid exposure to temperatures outside the specified range, and ensure stable AC power to prevent network interruptions. Regularly check LED indicators to monitor link and activity status.