FTP computer network cable INNE KAB0104CCA — twisted pair 4x2 conductors 0.5 mm CCA

FTP computer network cable INNE KAB0104CCA — twisted pair 4x2 conductors 0.5 mm CCA is a shielded Ethernet cable designed for cost-conscious LAN and horizontal cabling installations. The cable uses four twisted pairs with 0.5 mm copper-clad aluminum (CCA) conductors and a foil (FTP) shield to reduce electromagnetic interference from adjacent cables and equipment. It is intended for typical office, home and patch-panel connections where moderate data rates are required and CCA conductors are an acceptable compromise between price and conductivity.

Advantages

The FTP construction with foil shielding helps limit external interference and crosstalk compared to unshielded variants, improving signal stability in environments with multiple cables or nearby electronic devices. Using 0.5 mm CCA conductors reduces material cost and weight while maintaining basic electrical continuity for Ethernet signals. The four twisted pairs support standard network topologies and terminate on common RJ45 connectors when properly prepared.

Suitable for

• Horizontal cabling in offices and small businesses
• Home network runs between router, switch and wall outlets
• Patch panels and short to medium-length patch cords
• Environments where foil shielding is beneficial to reduce interference

When it may not be suitable

This FTP cable uses copper-clad aluminum (CCA) conductors, which have higher resistance and different mechanical properties than solid or stranded copper conductors. CCA is not recommended for long-distance runs, PoE installations with higher current demands, or where full copper conductivity and long-term durability are required. Additionally, foil shielding requires proper grounding and careful termination to be effective; improper installation can negate shielding benefits.

Key specifications

• Conductor configuration: 4 twisted pairs (4x2 conductors)
• Conductor material: copper-clad aluminum (CCA)
• Conductor diameter: 0.5 mm
• Shielding: foil shield around all pairs (FTP)
• Typical use: Ethernet / LAN horizontal cabling and patching

How to use

Measure and cut the cable to the required length, allowing extra slack for routing and termination. Strip the outer jacket carefully to avoid nicking the foil shield and conductors. Fold back the foil shielding as required for your connector type and ensure a proper ground connection to preserve shielding effectiveness. Terminate pairs into RJ45 plugs or keystone jacks following the chosen wiring standard (T568A or T568B). Test each run with an appropriate cable tester to verify continuity, pair alignment and performance before placing the installation into production.

What to consider before purchase

• Intended run length and expected data rates (CCA is best for short to medium runs)
• Whether Power over Ethernet (PoE) will be used and the current requirements
• Need for reliable long-term conductivity and mechanical durability
• Requirement for proper shielding termination and grounding in your installation

Usage recommendations

Use this FTP 4x2/0.5 CCA cable for short to medium-length office or home Ethernet links, ensure correct terminations with grounded foil shield, and prefer it where cost savings outweigh the need for full copper performance. Verify each installation with a cable tester and avoid high-current PoE runs to maintain reliable operation.