INTELLINET 8-Port Gigabit Ethernet PoE+ Switch 2x Uplink RJ45 LCD 130W Rackmount

The INTELLINET 8-Port Gigabit Ethernet PoE+ Switch with 2x uplink RJ45 and integrated LCD is a rack-mountable unmanaged switch designed to combine Gigabit data switching with Power over Ethernet (IEEE 802.3at/af). It provides eight auto-sensing Gigabit RJ-45 access ports and two Gigabit RJ-45 uplink ports, a total PoE budget of 130 W and an LCD status display that reports per-port and total power usage as well as basic fault warnings. The switch supports standard Ethernet protocols and a 20 Gbit/s switching capacity, making it suitable for small to medium installations that require simultaneous data and power delivery to devices such as IP cameras, wireless access points and VoIP phones.

Advantages

This PoE+ switch supplies both data and power over standard network cables, simplifying installation by eliminating separate power wiring for PoE-capable devices. The integrated LCD screen shows real-time PoE consumption per port and system-level warnings (overload, short-circuit, high temperature), enabling quick status checks without dedicated monitoring software. With full-duplex Gigabit ports, 8192 MAC address table entries and a 20 Gbit/s switching capacity, the unit provides reliable throughput for connected endpoints. Built-in protections for short-circuit, overload and high voltage increase safety when powering network devices.

Suitable for

• Supplying power and network connectivity to IP surveillance cameras
• Powering and connecting wireless LAN access points and bridges
• Providing network and PoE for VoIP phones and small office terminal equipment
• Edge switching in small to medium-sized network racks

Key specifications

• Ports: 8 x Gigabit RJ-45 access ports (10/100/1000), 2 x Gigabit RJ-45 uplink ports
• PoE standard: IEEE 802.3at/af (PoE+ compatible)
• Total PoE budget: 130 W (maximum), average distribution 16.25 W per port; single-port maximum up to 30 W
• Switching capacity: 20 Gbit/s
• MAC address table: 8192 entries
• Duplex/flow control: Full duplex with IEEE 802.3x flow control
• Energy efficiency: Supports IEEE 802.3az (Energy-Efficient Ethernet)
• Form factor and color: Rackmountable, black
• Weight: approximately 2.5 kg

How to use

Mount the switch in a standard 19-inch rack or place it on a stable surface. Connect each PoE-capable device to the access ports using Cat5e or better cables to deliver both data and power. Use the two uplink RJ-45 ports to connect upstream switches or routers for network aggregation. Monitor the integrated LCD to review per-port power consumption and overall PoE budget usage; address any displayed overload or fault warnings by redistributing powered devices or reducing load. For non-PoE devices, connect them to any access port for data-only operation. Ensure adequate ventilation around the unit and keep operating temperatures within the manufacturer’s specified limits.

Usage recommendations

Prioritize critical devices when the total PoE power draw approaches 130 W: distribute high-power devices across ports or use an external PoE injector or splitter for legacy equipment. Use Cat5e or higher-rated cabling for stable Gigabit performance and verify device compatibility with IEEE 802.3at/af. Regularly check the LCD for warnings and plan rack airflow to prevent temperature-related power throttling or fault conditions.