Unmanaged Switch Intellinet 24-Port Gigabit Ethernet PoE+ 370W

The Intellinet 24-Port Gigabit Ethernet PoE+ Switch (model 561907) is an unmanaged, rack-mountable network switch that provides 24 Gigabit RJ45 ports plus two SFP slots and a 370W PoE power budget. It delivers up to 30W per port using IEEE 802.3at (PoE+) and supports powering devices such as IP cameras, wireless access points and VoIP phones while carrying data at speeds up to 1,000 Mbps. The switch also includes a Powered Device Monitoring (PD Alive) function and a selectable PoE Extend Mode for longer-distance power delivery.

Advantages

This PoE+ switch supplies power and data over standard Cat5e/Cat6 cables and supports mixed PoE and non‑PoE devices without additional power adapters. Two dedicated SFP ports provide fiber connectivity for extended reach, and the total switching capacity supports high aggregated throughput. Built‑in protections guard against short circuits, overloads and high voltage. The PD Alive self‑healing feature can automatically reboot unresponsive powered devices, reducing on‑site maintenance, and the front-panel PoE Extend Mode enables power delivery up to 250 m when needed.

Suitable for

• IP video surveillance systems (network cameras)
• Wireless LAN access points and bridges
• VoIP phone deployments
• Small to medium-sized office network edge and rack installations

Key specifications

• Ports: 24 x Gigabit RJ45 (10/100/1000 Mbps) + 2 x SFP
• PoE standard: IEEE 802.3at (PoE+), up to 30 W per port
• Total PoE power budget: 370 W
• Switch type: Unmanaged
• Bandwidth: non-blocking switch fabric, total throughput up to 52 Gbps
• PD Alive / Powered Device Monitoring (self-healing PoE)
• PoE Extend Mode: selectable, extends PoE range to 250 m (reduces link speed)
• Form factor: 19" rack-mountable

How to use

Install the switch in a networking rack or place it on a stable surface and connect power. Use Cat5e or Cat6 cables to connect PoE devices to the RJ45 ports and insert SFP modules into the SFP slots for fiber links as required. Configure connected devices according to their manufacturer instructions; the unmanaged switch requires no software configuration. Use the front-panel PoE Extend Mode switch when you need to power devices at distances up to 250 m, and rely on the PD Alive function to automatically reset unresponsive powered devices.

Usage recommendations

For reliable operation, distribute powered devices to avoid exceeding the 370 W total PoE budget, verify device compatibility with IEEE 802.3at/af where possible, and use quality Cat5e/Cat6 cabling. Use SFP fiber modules that match your fiber type and distance requirements. Consider using an Intellinet PoE splitter for legacy devices that lack PoE compatibility.