Self-adhesive Copper Tape Strips for Securing Braid Shield on Network Cables, IT-BUDGET 20 pieces

Self-adhesive Copper Tape Strips for Securing Braid Shield on Network Cables, IT-BUDGET 20 pieces are conductive tape strips supplied as a pack of 20, intended to fasten and maintain electrical contact of braided shields and drain wires at cable terminations and connectors. These copper strips assist in establishing reliable shielding continuity and grounding at shielded twisted pair (STP) and other shielded network cable terminations during installations and repairs.

Advantages

The self-adhesive copper tape strips provide a simple mechanical and electrical method to secure braid and drain wires without soldering. Their conductive adhesive ensures contact between the braid and connector housing or grounding point, reducing the risk of intermittent shield contact. Supplied in a convenient pack of 20, they are suitable for repetitive use in structured cabling tasks, maintenance and field repairs.

Suitable for

• Securing braid/drain wire at RJ45 and other network cable connectors
• Shield terminations for STP, FTP and other shielded copper network cables
• On-site cable repairs and structured cabling installations
• EMC grounding continuity between cable shield and metal connector or chassis

When it may not be suitable

These strips are designed for use on shielded copper network cables and may not be appropriate for fiber optic cables, which do not use conductive shielding. For applications requiring permanent soldered joints, mechanical crimping, or environments with extreme mechanical stress, other termination methods may be preferable. The adhesive backing is intended for typical indoor installations; very high-temperature or highly corrosive environments may reduce adhesive or conductive lifetime.

Key specifications

• Material: conductive copper tape with adhesive backing
• Pack quantity: 20 pieces
• Primary use: securing braided shield and drain wire at terminations
• Typical environments: indoor structured cabling and field repairs

How to use

Strip the cable jacket and fold back the braided shield or expose the drain wire according to connector manufacturer instructions. Clean the contact area of any debris or insulating residue. Place a copper tape strip so it contacts the braid/drain wire and overlaps the connector housing or grounding point, pressing firmly to ensure adhesive contact. Trim any excess tape. Verify continuity of the shield to ground with suitable testing equipment after termination.

What to consider before purchase

• Confirm compatibility with the type of shielded cable being used (STP, FTP, etc.).
• Assess environmental conditions (temperature, moisture, chemical exposure) that may affect adhesive performance.
• Determine whether a soldered or mechanical termination is required by the installation standards or equipment manufacturer.
• Ensure you have appropriate tools to prepare the cable and test grounding continuity.

Usage recommendations

For reliable shield continuity, prepare a clean contact surface and apply firm pressure when placing the copper strip. After application, perform a shield continuity check and, where permitted, combine with screw or clamp grounding points for mechanical reinforcement in higher-stress installations.