Brass stainless finish T-piece KAN-therm 28×28 mm x 3/4" with male thread, model 6191658

KAN-therm 28×28 mm x 3/4" brass stainless finish T-piece model 6191658 is a compact plumbing fitting intended for transitions between two 28 mm pipe runs and a 3/4" male threaded outlet. Constructed with a stainless-style brass finish, this T-piece is designed for use in potable water and heating installations where a reliable connection to threaded fittings or valves is required. The geometry allows for a perpendicular branch connection while maintaining flow continuity in the main line.

Advantages

The brass stainless finish provides corrosion resistance and an appearance suited to visible plumbing runs. The fitting offers stable mechanical strength typical of brass components while enabling a straightforward transition from 28 mm pipes to a 3/4" male thread. Its compact dimensions make it suitable for installations with limited space and it is compatible with standard connection techniques used in domestic and light commercial systems.

Suitable for

• Connecting two 28 mm pipe runs to a 3/4" threaded valve or fitting
• Potable water distribution systems
• Heating circuits and radiator branch connections
• Tight-space plumbing where a compact T-piece is required

Key specifications

• Connection sizes: two 28 mm pipe connections and one 3/4" male threaded outlet
• Material and finish: brass with stainless-style finish for corrosion resistance
• Type: T-piece (branching fitting for perpendicular outlet)
• Application: suitable for potable water and heating systems
• Design: compact form factor for space-limited installations

How to use

Install the T-piece by preparing the 28 mm pipe ends according to the chosen joining method (e.g., press, solder, or compression, depending on system compatibility) and secure the 3/4" male thread into the corresponding threaded fitting or valve using appropriate sealing (such as PTFE tape or thread sealant). Ensure all connections are tightened to the manufacturer's recommended torque and perform a pressure test of the system after installation to check for leaks. Follow local plumbing codes and material compatibility guidelines when selecting joining techniques.

Usage recommendations

Use suitable thread sealant on the 3/4" male outlet and verify that the chosen pipe connection method (press, solder, or compression) is compatible with brass fittings. During installation, avoid excessive mechanical stress on connected pipes and check for leaks under operating pressure before commissioning the system.