Karcher BP 3.200 Home - domestic water pump, 600 W, 3200 l/h, 8 m

The Karcher BP 3.200 Home is a domestic water pump designed for extracting and supplying water from wells, cisterns and storage tanks. With a rated input power of 600 W and a maximum flow rate of 3200 l/h, the unit supports moderate household irrigation, garden watering and pressure boosting for domestic water circuits. The pump features a reliable non-return valve and is built for stationary or semi-stationary installation near the water source.

Advantages

The pump delivers a consistent flow rate up to 3200 l/h while maintaining energy-efficient operation at 600 W input power. Its suction capability down to 8 m allows use with shallow to medium-depth wells and deep tanks. The integrated non-return valve prevents backflow and ensures stable pressure in the supply line. Compact construction and straightforward connections facilitate installation and routine maintenance.

Suitable for

• Supplying water from wells and cisterns to household systems
• Garden irrigation and sprinkler systems for medium-sized plots
• Boosting water pressure for taps, hoses and outdoor fixtures
• Filling and transferring water between tanks and containers

Key specifications

• Rated power: 600 W
• Maximum flow rate: 3200 l/h
• Maximum suction depth: 8 m
• Integrated non-return valve for backflow protection
• Suitable for stationary or semi-stationary installation

How to use

Position the pump on a stable, level surface close to the water source and connect the inlet and outlet hoses according to the installation instructions supplied with the unit. Ensure all connections are tightened and the non-return valve is correctly oriented. Prime the pump if required by the specific installation, then switch on the unit using the power supply. Monitor the flow and pressure during the initial run to verify correct operation and check for leaks. Follow local electrical safety regulations when connecting to the mains.

Usage recommendations

Use clean water free of large solids to avoid premature wear. For longer service life, install a coarse filter on the inlet when drawing from open sources. Avoid running the pump dry and observe recommended duty cycles; perform regular checks on seals and fittings and replace worn components as needed.