Aluminium radiator kfa² Element G 500 F/D right-side, bottom connection, with straight connection set 50×50 mm (cross-fed)

The kfa² Element G 500 F/D aluminium radiator with a right-side bottom connection is designed for central heating systems where a compact, lightweight convector is required. Supplied with a straight connection set 50×50 mm configured for cross-fed installations, this radiator combines aluminium construction with panel-style design to provide effective heat transfer and a reduced thermal mass. Its right-sided panel and bottom inlet arrangement make it suitable for installations with pipework aligned to one side and low-entry connections.

Advantages

Constructed from aluminium for rapid heat-up and efficient thermal conductivity, the Element G 500 F/D offers a favorable power-to-weight ratio compared with heavier steel radiators. The included straight connection set 50×50 mm set up for cross-fed installation simplifies plumbing alignment and reduces on-site adaptation. The unit’s compact depth and right-side bottom inlet support installation in confined spaces and allow for discreet placement beneath windows or along external walls.

Suitable for

• Residential rooms requiring local convective heating with a right-side bottom connection
• Commercial spaces with limited installation depth or low-entry pipework
• Retrofit projects where cross-fed pipe configurations are used
• Areas where a lightweight aluminium radiator is preferred for easier handling

Key specifications

• Material: aluminium
• Configuration: right-side bottom inlet
• Connection set: straight 50×50 mm configured for cross-fed installation
• Type: panel/aluminium convector style
• Application: central heating systems

How to use

Install the radiator according to the heating system layout, ensuring the right-side bottom inlet aligns with existing pipework or new supply and return lines. The supplied straight connection set 50×50 mm is configured for cross-fed plumbing; verify flow direction before final connection. Secure the radiator to a suitable wall bracket, bleed air from the radiator after filling the system, and check for leaks at the connection points. Commission the system following local codes and standard commissioning procedures for central heating installations.

Usage recommendations

Use corrosion-inhibited water compatible with aluminium components and maintain system water quality according to manufacturer or industry guidelines. For optimal performance, balance the system and set controls to match room heat requirements; periodic inspection of connections and bleeding is advised during the first heating season.