Hand plane Kirschen Handhobel Flatfix 95×50×4.5 mm round — woodworking tool, small flat smoothing plane

Kirschen Handhobel Flatfix is a compact smoothing plane with a rounded body geometry measuring 95×50×4.5 mm. Designed for fine flattening and smoothing of wood surfaces, this small flat plane is intended for detail work, narrow edges and confined areas where larger planes cannot reach. The plane provides controlled, precise material removal for joinery, repair and finishing tasks in carpentry and woodworking.

Advantages

The compact dimensions and rounded profile enable access to tight spaces and small workpieces while maintaining a stable grip and consistent shaving thickness. The solid-body design ensures rigidity and accurate planing over short strokes. The Flatfix geometry supports controlled smoothing without aggressive stock removal, making it suitable for delicate finishing and fine adjustments.

Suitable for

• Detail smoothing on furniture components and mouldings
• Trimming edges and narrow boards
• Final finishing of joinery joints and tenons
• Repair and touch-up work on wooden surfaces
• Working in confined spaces where larger planes are impractical

Key specifications

• Overall length: 95 mm
• Body width: 50 mm
• Body thickness: 4.5 mm
• Rounded body geometry for access to edges and small surfaces
• Designed for fine flattening and smoothing of wood

How to use

Hold the Kirschen Handhobel Flatfix with a comfortable grip and position the rounded sole against the workpiece. Adjust your stroke length to match the short working surface; use light, controlled passes to remove thin shavings for a smooth finish. Work with the grain where possible, and progressively reduce cutting depth for final smoothing. For precision work, support the workpiece securely to avoid chatter and ensure even contact along the sole.

Usage recommendations

Keep the blade sharp and honed to achieve consistent, fine shavings. Check the sole for flatness and keep the plane clean of resin or dust to maintain smooth action. Use minimal pressure and increase only as needed for slightly heavier removal; reduce depth on final passes to prevent tear-out. Store the tool in a dry place to protect the working edge and body.