Compression Pipe Fitting Kisan VESTOL 16x2 mm (3/4") model 20.32.12

Compression pipe fitting Kisan VESTOL 16x2 mm (3/4") model 20.32.12 is designed to connect 16x2 mm polymer or multilayer tubing to a 3/4" threaded connection. The fitting creates a mechanical compression seal without soldering, enabling fast assembly and reliable jointing for plumbing, heating and water supply systems. Its construction is intended for use where a transition from small-diameter pipework to standard 3/4" threaded fixtures, valves or adapters is required.

Advantages

The compression design provides a leak-resistant connection without the need for heat or adhesive, reducing installation time and tools required. The fitting supports a direct mechanical seal on 16x2 mm tubing and offers compatibility with common 3/4" threaded components, simplifying transitions between pipe and fixture. Its compact form factor allows installation in confined spaces, while the metal construction ensures dimensional stability and resistance to deformation under standard operating conditions.

Suitable for

• Connecting 16x2 mm polymer or multilayer pipes to 3/4" threaded valves and fixtures
• Plumbing repairs and retrofit work where soldering is impractical
• Domestic heating system connections and radiator fittings
• Water supply lines where a threaded adaptor is required

Key specifications

• Pipe compatibility: 16 x 2 mm polymer or multilayer tubing
• Threaded connection: 3/4" (female/male depending on mating component)
• Connection type: compression (mechanical seal without soldering)
• Typical applications: plumbing, heating, water supply
• Installation environment: indoor plumbing and heating systems

How to use

Cut the 16x2 mm pipe squarely and remove any burrs or rough edges. Slide the compression nut and olive (ferrule), if included, onto the pipe, then insert the pipe end fully into the fitting body until it seats. Hand-tighten the compression nut and then use an appropriate wrench to tighten to the manufacturer's recommended turn count or until a secure mechanical seal is achieved. Connect the 3/4" threaded end to the mating fixture or valve using appropriate thread sealing practice on threaded joints if required by the installation (for example, compatible thread tape or sealing compound on the mating connection).

Usage recommendations

Verify pipe outer diameter and wall thickness match the 16x2 mm specification before installation. Use proper tools to avoid over-tightening, which can deform the pipe or ferrule and compromise the seal. For potable water systems, ensure materials and sealing methods comply with local regulations and standards.