Freestanding rack Lanberg FF01-8227-23BL

Freestanding Lanberg cabinet FF01-8227-23BL is a 27U 19" rack cabinet designed for mounting networking and server equipment with a maximum loading capacity of 800 kg. Constructed from high-grade cold rolled steel with a black RAL9004 powder-coated finish, the cabinet includes adjustable vertical mounting rails, removable side panels with locks, a perforated front and rear door with lock, grounding points, and top and bottom cable entry panels. The unit is supplied as four flat packs for self-assembly and includes mounting accessories, M6 cage nuts, blank entry panels, a fan tray with four 230V fans and a thermostat, and a front-mounted LCD that displays internal temperature, fan status and time.

Advantages

The Lanberg FF01-8227-23BL offers a sturdy steel construction and compliance with common rack standards (ANSI/EIA RS-310D, IEC297-2, DIN41494, ETSI). Adjustable rail depth and included accessories simplify installation of cabinets and equipment, while removable panels and front/rear perforated doors ensure efficient airflow. Built-in grounding points, caster wheels with brakes and adjustable feet provide stable installation and flexible placement. The integrated LCD and thermostat-controlled fan tray enable basic environmental monitoring and temperature control.

Suitable for

• Data centers and server rooms
• Small and medium business network installations
• CCTV, IP surveillance and access control systems
• Cable television and other low-voltage systems

Key specifications

• Manufacturer: Lanberg
• Model / MPN: FF01-8227-23BL
• Type: Freestanding 19" rack cabinet
• Rack capacity: 27U
• External dimensions (W x D x H): 800 x 1200 x 1438 mm
• Internal usable height (top panel - bottom panel): 1352 mm
• Internal usable height to ground: 1425 mm (1431 mm including screws)
• Internal rail spacing: 450 mm; hole spacing: 465 mm; external rail spacing: 500 mm
• Maximum load capacity: up to 800 kg
• Degree of protection: IP20
• Doors: Front perforated with lock, Rear perforated with lock
• Top cover: Fan tray with 4 x 230V fans and thermostat
• Floor panel: 4 castors with brake + adjustable feet
• Material: Cold rolled steel, powder coated (Black RAL9004)
• Standards: ANSI/EIA RS-310D, IEC297-2, DIN41494 PART1 & PART7, ETSI
• Packaging includes: mounting accessories, front and rear door locks, two side panel locks, 20 x M6 screws, 2 x vertical cable organizers, 4 x casters, 4 x feet, blank entry panels

How to use

Unpack the four flat packs and assemble the cabinet following the supplied instructions. Adjust the vertical mounting rails to the required depth and fit M6 cage nuts to mount 19" equipment. Install the front and rear doors on the preferred hinge side if needed, secure side panels with included locks and connect grounding points to building earth. Route cables through the top or bottom adjustable entry panels and mount the fan tray in the top cover. Plug fans into a suitable 230V supply and use the built-in thermostat and LCD to monitor internal temperature and fan status.

Usage recommendations

Place the cabinet on a level surface and fix the adjustable feet or lock the castors to prevent movement. Maintain sufficient clearance around perforated doors and top vents for airflow, distribute load evenly across rails and observe the 800 kg maximum capacity. Use proper earthing to ensure safety and monitor temperature readings on the LCD to avoid overheating.