Lanberg Cat6 RJ-45 Patch Cable PCF6-20CC-0050-B, 0.5 m, U/UTP, 250 MHz, CCA, Blue

Lanberg Cat6 RJ-45 Patch Cable PCF6-20CC-0050-B is a short, flexible network patch cable designed for connecting devices in confined spaces. With a length of 0.5 m and Cat6 specification, the cable provides a 250 MHz bandwidth and supports data rates up to 10 000 Mbit/s. Constructed with 26 AWG copper-clad aluminium (CCA) conductors and a PVC jacket, this U/UTP (unshielded) cable features RJ-45 male connectors on both ends and an outer diameter of 5.4 mm. The blue jacket makes it easy to identify in patch panels and networking setups at home or in the office.

Advantages

The compact 0.5 m length reduces cable clutter and is suitable for short links between network devices, switches and patch panels. Cat6 performance with 250 MHz frequency enables reliable Gigabit and multi-gigabit connections where short interconnects are needed. The PVC jacket and 26 AWG CCA conductors provide a cost-effective solution for installations where full copper conductors are not required. U/UTP construction keeps the cable flexible and easy to route through racks, behind desks or inside equipment enclosures.

Suitable for

• Short connections between switches, patch panels and network devices
• Home networking and SOHO setups with limited cable runs
• Patching in network cabinets and server racks
• Temporary test connections and lab environments

Key specifications

• Length: 0.5 m
• Cable category: Cat6
• Frequency: 250 MHz
• Data transfer rate: up to 10 000 Mbit/s
• Conductor type and size: 26 AWG copper-clad aluminium (CCA)
• Configuration: U/UTP (unshielded)
• Connectors: RJ-45 male — both ends
• Jacket material: PVC (polyvinyl chloride)
• Outer diameter: 5.4 mm
• Colour: Blue

How to use

Plug each RJ-45 connector into the corresponding Ethernet ports of your devices, switches or patch panels. Ensure connectors are fully inserted until the latch clicks to secure a reliable connection. For optimum performance, avoid tight bends and excessive tension on the cable; maintain gentle curves and route the cable away from sources of strong electromagnetic interference. The short 0.5 m length is intended for direct device-to-panel or device-to-switch connections within close proximity.

Usage recommendations

Use this cable for short, local interconnections where space is limited and where a cost-effective Cat6 cable is sufficient. For permanent installations requiring maximum conductivity or environments with strong electromagnetic interference, consider using equivalent cables with solid copper conductors or shielded variants.