LANBERG networking cable Cat6a RJ-45 to RJ-45 S/FTP LSZH, 1 m, Blue

LANBERG networking cable Cat6a RJ-45 to RJ-45 S/FTP LSZH, 1 m, Blue is a 1-metre patch cable designed for high-speed Ethernet connections. It features RJ-45 male connectors on both ends, S/FTP (S-STP) shielding and a Low Smoke Zero Halogen (LSZH) outer jacket. The conductor uses Copper-Clad Aluminium (CCA) with AWG 26 wires, supports frequencies up to 500 MHz and has an outer diameter of 6 mm. The cable is intended for short links, patch panels and equipment interconnects where Cat6a performance characteristics and improved electromagnetic protection are required.

Advantages

The cable combines Cat6a performance with S/FTP shielding to reduce crosstalk and external electromagnetic interference. Its LSZH jacket limits smoke and hazardous gases in case of fire, making it suitable for installations where low-emission materials are preferred. The 1 m length and RJ-45 male connectors on both ends offer a ready-to-use solution for patching between network devices, switches and patch panels. The compact 6 mm diameter and blue jacket allow clear visual identification in structured cabling environments.

Suitable for

• 10GBase-T short links and desktop patching
• Connecting switches, routers, patch panels and network interface cards
• Data centers, server rooms and office structured cabling where short interconnects are needed
• Environments requiring reduced electromagnetic interference due to S/FTP shielding

Key specifications

• Cable category: Cat6a
• Length: 1 m
• Connector type: RJ-45 male to RJ-45 male
• Shielding: S/FTP (overall braid with individually foil‑shielded pairs)
• Conductor material: Copper‑Clad Aluminium (CCA)
• Wire gauge: AWG 26
• Frequency rating: up to 500 MHz
• Jacket: Low Smoke Zero Halogen (LSZH)
• Outer diameter: 6 mm
• Colour: Blue

How to use

Connect one RJ-45 male end to your network device and the other to the corresponding port on a switch, patch panel or computer. Ensure connectors are fully inserted until they click to secure the physical connection. For best signal integrity, avoid sharp bends, kinks or prolonged compression of the cable and keep it separate from large power conductors to reduce interference. The cable is intended for in-room and rack patching rather than long horizontal runs.

Usage recommendations

Use the LANBERG Cat6a S/FTP LSZH cable for short, high-speed interconnects up to 10GBase-T. Prefer this LSZH variant in enclosed spaces or areas with strict fire-safety requirements. Inspect connectors before use and replace the cable if the jacket or plugs show visible damage. For longer permanent runs, consider using solid-conductor cables designed for horizontal cabling.